[solved] Fix Axes Applying to wrong logical axis

[jukelo]

Issue: Fix Axes > FA1 (and FA2) freezes the wrong logical axes.

Firmware: issue is present in 2.18.9 and 2.18.E. Absent from 2.17.6. (I suspect it started with 2.17.9)

Steps to reproduce:

• On THQ with 2.18.9 firmware, set AxID for Logical axes 1 and 2 to 2.
• Assign FA1 function to two separate buttons:
  
  1. One FA1 button will center and freeze Logical axis 1
  2. the other FA1 is for logical axis 2
• Move logical axes 1 and 2 out of the center
• Press FA1 > axis 1 button: Logical axis 1 remains uncentered and responsive.
• Press FA1 > axis 2 button: Logical axes 1 and 2 are centered and frozen.

Here is the demonstration of the bug:
https://youtu.be/SFjmjoEQh14

The expected behaviour, with firmware 2.17.6, is for each button to freeze only the corresponding logical axi:
https://youtu.be/AZWV1HYHX7A

[Alex Oz]

accepted

Try v2_18_F

[jukelo]

This fixes all Fix Axes functions, awesome!

However, this also breaks ALL logical axes in a profile that does not include at least one Fix Axes button (FA or DR, even if it doesn't apply to any axis). In such a case all logical axes become unresponsive. The physical and virtual axes function fine.

[Alex Oz]

Thanks, check v2_18_F(2)

[jukelo]

Profiles with and without Fix Axes are now working great in 2.18.F(2), thanks.

[Alex Oz]

OK, thanks for all your help.