VKB-SIM

Good Day,
I had the gladiator NXT which is working fine.
i just received FSM-GA and GNX-HID from aliexpess store. i have installed the GNX-HID into the FSM-GA.
i connected the FSM-GA via the GNX-HID to my hp laptop but no response and no led light up.
i have watched several videos on youtube, but none talked about FSM-GA direct setup.
However, i tried "find & show" step (From videos) still the FSM-GA was not regocnized.
Kind give details on how to connect FSM-GA directly.

See attached photo with my Gladiator nxt and FSM connected. No FSM recognition.

Try using the recommended firmware (not lower). A photo of the Hid connection would not hurt.

Firmware updated for NXT.
HID is connected to laptop with usb-c to usb-A cable that came with it.

After connecting, you need to upload the firmware for the GNX-USB controller, it is located in the Gladiator_NXT_ series folder. With subsequent reset to default and configuration.

When connected, the GNX-USB controller is not listed for flashing on the zbootloader app.
Also when connected to the laptop, no response/sound (as in when a device is connected).
Will i need a driver for the GNX-USB controller?

Just used my high power usb cable for phone and the FSM is working now.
The usb cable that came with the GNX-HID didnt work.
Thanks for your response.