VKB-SIM

Hi folks! I just today decided to go through and look to see if there were firmware and config updates for my sticks, and in doing so downloaded the 92.98 CFG tool (I have been using 92.51 so far). I immediately noticed something off - the Axis options underneath "Enable MCG Pro Trigger" on the Profile -> Axes2Buttons tab are not only incorrect (showing the wrong axis), but almost missing in their entirety. Loading up the 92.51 tools shows the correct data, but in 92.98 it's busted. I can tweak away and apply the modifications successfully in 92.51, but not in 92.98.

I've attached screenshots of what I'm seeing in both of the tools.

In 92.98:



In 92.51:




This makes it difficult to follow along with some prior guides I've been using to tweak the trigger options, so I'm wondering if it's a bug?

Thanks for your time!

EDIT: I got the versions wrong on first post, I've fixed them in the shots above.

The first axis on the second virtual controller is actually the same with the 9th axis on a single controller because what's over 8 is automatically transferred over to the second virtual controller in order to get recognized by Windows.

Ah, thanks for that clarification, that makes sense. Much appreciated!

However, that doesn't address the other missing fields. Used to be I could configure those settings right there, making them easy to access and tweak. They're gone now, and nothing I change brings them back, was this an intentional decision?

OKay I guess I see what is happening now. The Axis represented there can also be configured further below in the lower panel, so that makes those original boxes unnecessary. I just wish there were a way to expand the lower box to show 9 or more lines at a time, but that's for a later consideration.

Consider this one solved.

See all settings for the axis on the second virtual controller (VC2, 9th physical axis).