Hi guys,
First post. I tried looking for this elsewhere, but had no joy.
Having issues with two of the buttons not being configured on my Gunfighter IV. Have run the Config tool multiple times in an attempt to resolve.
These buttons are currently not working in DCS;
<blockquote class="imgur-embed-pub" lang="en" data-id="a/mODiCzY" data-context="false" ><a href="//imgur.com/a/mODiCzY"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>
And I have this light on the Black Box;
<blockquote class="imgur-embed-pub" lang="en" data-id="a/mODiCzY" data-context="false" ><a href="//imgur.com/a/mODiCzY"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>
Any help appreciated!
Cheers,
PMak
Gunfighter IV - configuration not 100% complete
Moderator: AdminGroup
- fallout9
- Posts: 5211
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1224 times
Re: Gunfighter IV - configuration not 100% complete
Unfortunately your images won't load. Which buttons are you issues with?
Re: Gunfighter IV - configuration not 100% complete
fallout9 wrote:Unfortunately your images won't load. Which buttons are you issues with?
https://imgur.com/a/mODiCzY
Pmak71 wrote:Hi guys,
First post. I tried looking for this elsewhere, but had no joy.
Having issues with two of the buttons not being configured on my Gunfighter IV. Have run the Config tool multiple times in an attempt to resolve.
These buttons are currently not working in DCS;
Do they show up in vkbdevcfg's test tab? Can you please take a screenshot of vkbdevcfg with profile/buttons/physical layer shown?
Re: Gunfighter IV - configuration not 100% complete
Hey Delta,
Thanks for your response. I have included a screen shot below
https://imgur.com/a/b8naLv0
I can see the Rot X and Rot Y axis moving fine while in VKBDevCfg-C, but for some weird reason it won't recognize once I end calibration?
Thanks for your interest in helping me.
PMak
Thanks for your response. I have included a screen shot below
https://imgur.com/a/b8naLv0
I can see the Rot X and Rot Y axis moving fine while in VKBDevCfg-C, but for some weird reason it won't recognize once I end calibration?
Thanks for your interest in helping me.
PMak
- fallout9
- Posts: 5211
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1224 times
Re: Gunfighter IV - configuration not 100% complete
First of all, you'll have to properly initialize the joystick, please follow these steps:
- run VKBDevCfg as Admin;
- select the device at the top, then click the Default button under the Tools tab;
- the joystick will restart, then you'll get a popup asking to configure, click Yes;
- after another restart you'll get another popup, this time about calibration, click No to it, then calibrate the device using this guide: https://youtu.be/c4WREzN19pE.
About the 2 ministicks indicated in your pic: the Master Mode ministick has 2 modes - digital/pov and analog/axes. You can swap through the 2 modes by clicking the center push button of the ministick. By default, it's in pov mode and clicking the center push button once will put it in axes mode. Clicking the center push button again will swap it back to digital mode. If you want to bind it to digital controls in game (buttons) make sure it's in pov mode; if it's in axes mode it won't get recognized. Similarly, if you want to bind it to axes in game, then make sure the ministick is in analog mode.
The other one, the Gate Cont ministick has by default only axes, no buttons, but it could get programmed similarly with the other one, as shown in this guide: https://youtu.be/BBQadRNHeDo
- run VKBDevCfg as Admin;
- select the device at the top, then click the Default button under the Tools tab;
- the joystick will restart, then you'll get a popup asking to configure, click Yes;
- after another restart you'll get another popup, this time about calibration, click No to it, then calibrate the device using this guide: https://youtu.be/c4WREzN19pE.
About the 2 ministicks indicated in your pic: the Master Mode ministick has 2 modes - digital/pov and analog/axes. You can swap through the 2 modes by clicking the center push button of the ministick. By default, it's in pov mode and clicking the center push button once will put it in axes mode. Clicking the center push button again will swap it back to digital mode. If you want to bind it to digital controls in game (buttons) make sure it's in pov mode; if it's in axes mode it won't get recognized. Similarly, if you want to bind it to axes in game, then make sure the ministick is in analog mode.
The other one, the Gate Cont ministick has by default only axes, no buttons, but it could get programmed similarly with the other one, as shown in this guide: https://youtu.be/BBQadRNHeDo
Re: Gunfighter IV - configuration not 100% complete
Wow, that is pretty far from easy LOL. But you have me sorted!
Thanks very much for helping resolve the issue.
Cheers,
PMak
Thanks very much for helping resolve the issue.
Cheers,
PMak
Who is online
Users browsing this forum: No registered users and 11 guests