VKB Pedals oooold model (MK1,2?) support

[VladZ]

Hey gents,

I am a lucky owner of a pretty old model pedals ( circa 2012..), that were on the shelf for a bit of time, so happens, I need them again.

The issue is under Win10, plugging in USB adds entry under Human Interface Devices - USB Input Device, with exclamation triangle on it - Properties show "This device cannot start (Code 10) .. etc..

For the device itself, if it helps
Hardware Ids : USB\VID_03EB&PID_4F8D&REV_0401 USB\VID_03EB&PID_4F8D


So the question is,
1. Do I need VKB driver for it? and where to get it?
2. any suggestions to have it working again?

Thanks

[Victorus]

What pedals do you have? T-rudder or something else? Have you Tiny box, black box or another?

[VladZ]

Hi Victorus,

Here are some pics if that helps, it's one of the original models from when VKB just started building them, under name Mk I or Mk II ...:

[VladZ]

top view

[Ron61]

You need a photo of the controller in the pedals, preferably on both sides.

[Victorus]

I have the same or similar. 3-axis Mk3. Own controller is old. Obsolete. Long time ago I used standalone external controller. Any of - TinyBox, ThrottleBox, then BlackBox of any color). Any with RJ45 socket. Now my pedals are connected to BlackBox together with GunFighter base and work fine.

[Delta]

then BlackBox of any color). Any with RJ45 socket.

I assume that means Mk1 or Mk2? Since Mk3 does not have the D-MaRS channels onthe RJ45 socket anymore.

[Victorus]

You can connect patch-cord directly from pedal sensors board RJ45 to controller's one. Similar to T-Rudder.