Hey gents,
I am a lucky owner of a pretty old model pedals ( circa 2012..), that were on the shelf for a bit of time, so happens, I need them again.
The issue is under Win10, plugging in USB adds entry under Human Interface Devices - USB Input Device, with exclamation triangle on it - Properties show "This device cannot start (Code 10) .. etc..
For the device itself, if it helps
Hardware Ids : USB\VID_03EB&PID_4F8D&REV_0401 USB\VID_03EB&PID_4F8D
So the question is,
1. Do I need VKB driver for it? and where to get it?
2. any suggestions to have it working again?
Thanks
VKB Pedals oooold model (MK1,2?) support
Moderator: AdminGroup
Re: VKB Pedals oooold model (MK1,2?) support
What pedals do you have? T-rudder or something else? Have you Tiny box, black box or another?
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: VKB Pedals oooold model (MK1,2?) support
Hi Victorus,
Here are some pics if that helps, it's one of the original models from when VKB just started building them, under name Mk I or Mk II ...:
Here are some pics if that helps, it's one of the original models from when VKB just started building them, under name Mk I or Mk II ...:
Re: VKB Pedals oooold model (MK1,2?) support
I have the same or similar. 3-axis Mk3. Own controller is old. Obsolete. Long time ago I used standalone external controller. Any of - TinyBox, ThrottleBox, then BlackBox of any color). Any with RJ45 socket. Now my pedals are connected to BlackBox together with GunFighter base and work fine.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: VKB Pedals oooold model (MK1,2?) support
Victorus wrote:then BlackBox of any color). Any with RJ45 socket.
I assume that means Mk1 or Mk2? Since Mk3 does not have the D-MaRS channels onthe RJ45 socket anymore.
Re: VKB Pedals oooold model (MK1,2?) support
You can connect patch-cord directly from pedal sensors board RJ45 to controller's one. Similar to T-Rudder.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Who is online
Users browsing this forum: No registered users and 55 guests