Which firmware.

[perb1967]

Hi.

I'm in the process of updating firmware in my Gladiator NXT EVO 'Space Combat Edition' - SCG Premium, which I just bought.

But which version should i use - and what is the difference between these versions.

1.: _Gladiator_EVO_kmz41_v2_16_5
2.: _Gladiator_EVO_OTA_kmz41_v2_16_5
3.: _Gladiator_EVO_OTA_v2_16_5
4.: _Gladiator_EVO_v2_16_5
5.: _Gladiator_NXT_OTA_v2_16_5
6.: _Gladiator_NXT_v2_16_5
7.: _GNX_USB_Controller_v2_16_5

Hope someone can shed some light on this. Thanks in advance.

BR.
Per from Denmark

[Victorus]

Gladiator_EVO_v2_16_5. Omni firmware. After you complete, press Find & Show on External tab. Your grip will be detected.

[perb1967]

Thank´s, I will do that

[jumonjiken]

What is the OTA file for? and kmz41?

[fallout9]

OTA is for OTA devices (omni-throttle extension).
KMZ is for some devices which presents inversed axes.

[jacksko]

I have a similar question. My joystick is "Gladiator NXT EVO 'WWII Combat Edition' ",
Which if the firmware files should be used for this joystick?

Regards,

Jacsko

[Ron61]

Use the firmware for just Gladiator NXT EVO, when a window appears asking you to configure the device, you need to answer “yes” and the WWII grip will appear automatically.

[HappyShrapnel]

ok.....so my sticks are labeled on the base as 'Gladiator NXT EVO' so which firmware do I use as the update?

Left stick has the OTA fitted....

_Gladiator_EVO_kmz41_v2_16_5.vkb
_Gladiator_EVO_OTA_kmz41_v2_16_5.vkb
_Gladiator_EVO_OTA_v2_16_5.vkb
_Gladiator_EVO_v2_16_5.vkb
_Gladiator_NXT_OTA_v2_16_5.vkb
_Gladiator_NXT_v2_16_5.vkb
_GNX_USB_Controller_v2_16_5.vkb

[Ron61]

This depends on when your NXT EVO was manufactured. In the first batches kmz41 sensors were used, in subsequent batches others were installed.
And any firmware will work, only the main axes will be inverted.
It is by this criterion that you can determine what sensors are worth and adhere to the correct choice of firmware in the future.