Hello,
Problem when updating firmware on BB MKIII of new Gunfigther IV.
Joined image shows the problem.
How may I correct this ?
Best regards
I found this explanation on discord :
"""
This is expected. The first batch of Blackbox Mk3 chips was accidentally flashed to look like a Blackbox Mk2 to the updater. **DO NOT FLASH MK2 FIRMWARE, IT WILL NOT WORK**
"""
So what I have to do ? Whom have I to ask for a solution ? Have Ito ask for a new black box ?
Cannot update firmware on new BB MK3 (GFIV) device
Moderator: AdminGroup
Re: Cannot update firmware on new BB MK3 (GFIV) device
I have the same issue. Same error and no way to update..
Matteo
Matteo
- fallout9
- Posts: 5299
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 212 times
- Been thanked: 1239 times
Re: Cannot update firmware on new BB MK3 (GFIV) device
@KPX @matteo_bz
Please run zbootloader, select your device, click the Start Boot button, then in the command line erase the Select File -> bit and instead write: save
Open the folder where zbootloader is and you'll find a file with extension .op1, zip it and attach it to a message here.
Please run zbootloader, select your device, click the Start Boot button, then in the command line erase the Select File -> bit and instead write: save
Open the folder where zbootloader is and you'll find a file with extension .op1, zip it and attach it to a message here.
Re: Cannot update firmware on new BB MK3 (GFIV) device
Hello,
Here you are ....
I put screenshots of what I have done.
Best regards.
Here you are ....
I put screenshots of what I have done.
Best regards.
- Attachments
-
- VKB_GFIV_FWR.zip
- (168.41 KiB) Downloaded 92 times
Re: Cannot update firmware on new BB MK3 (GFIV) device
Just for info.
I succeed in updating 2.163 to 2.165 using latest version : _BlackBox_Mk3_Unified_v2_16_5_.vkb ---- downloaded today - 12 september 2023
Version of yesterday failed (as described above) : _BlackBox_Mk3_Unified_v2_16_5.vkb ---- downloaded yesterday - 11 september 2023
Best regards
I succeed in updating 2.163 to 2.165 using latest version : _BlackBox_Mk3_Unified_v2_16_5_.vkb ---- downloaded today - 12 september 2023
Version of yesterday failed (as described above) : _BlackBox_Mk3_Unified_v2_16_5.vkb ---- downloaded yesterday - 11 september 2023
Best regards
- fallout9
- Posts: 5299
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 212 times
- Been thanked: 1239 times
Re: Cannot update firmware on new BB MK3 (GFIV) device
There was an initial 2.16.5 version which was wrong, but it's been replaced; so, if you managed to flash the one that's been published on NA website, you're good. Let me know if the issue reappears, but pretty sure your bb is fine at this point.
Re: Cannot update firmware on new BB MK3 (GFIV) device
Need help with this as well. I have attached the .op1 file. Controller is no longer working at this point.
Thank you in advance for your help.
Thank you in advance for your help.
- fallout9
- Posts: 5299
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 212 times
- Been thanked: 1239 times
Re: Cannot update firmware on new BB MK3 (GFIV) device
There's no attachment. Are you sure you have a MKIII Black Box?
Re: Cannot update firmware on new BB MK3 (GFIV) device
Odd. I thought I attached it.
Here it is.
Additionally, whenever I try to flash the new firmware (Universal BB MK3) to the controller (MCG Ultimate Mk3 with the black BB) the stick disconnects from the system and does not accept the flash and doesn't reconnect. I have followed the YouTube video on the VKB channel and it won't complete successfully.
Let me know if there is anything more you need from me. Would like to get this firmware update completed successfully. That said, the controller is working on the 2.12 version now, so I'll just continue using it as such.
Thank you.
Here it is.
Additionally, whenever I try to flash the new firmware (Universal BB MK3) to the controller (MCG Ultimate Mk3 with the black BB) the stick disconnects from the system and does not accept the flash and doesn't reconnect. I have followed the YouTube video on the VKB channel and it won't complete successfully.
Let me know if there is anything more you need from me. Would like to get this firmware update completed successfully. That said, the controller is working on the 2.12 version now, so I'll just continue using it as such.
Thank you.
- Attachments
-
- MK3 MCGU OP1.zip
- (9.92 KiB) Downloaded 76 times
- fallout9
- Posts: 5299
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 212 times
- Been thanked: 1239 times
Re: Cannot update firmware on new BB MK3 (GFIV) device
I need to know if that's really a MKIII bb, please check the back of it. If not sure, post pics.
- fallout9
- Posts: 5299
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 212 times
- Been thanked: 1239 times
Re: Cannot update firmware on new BB MK3 (GFIV) device
That doesn't look like MKIII, flash the MKII firmware please.
Re: Cannot update firmware on new BB MK3 (GFIV) device
Was on vacation the last week.
I have tried that before and I just tried the MK 2 flash again and it failed.
Suggestions?
I have tried that before and I just tried the MK 2 flash again and it failed.
Suggestions?
Who is online
Users browsing this forum: No registered users and 6 guests