VKB-SIM

I have 2x Gunfighter MK 4's
They are connected with 2 blackbox MK3's

the 2 grips i have are the MCGU and the Kosmosima Grip.

The MCGU is set up fine. With 1 yellow light and 2 green lights.

The Kosmosima isn't working - it has 1 yellow, 1 green and 1 red light.

Not sure what the next steps are - as i understand it, the blackbox detects the device correctly and flashes itself. And should just work

Any idea on next steps / troubleshooting?

thanks

There's a buttons sequence you'll have to get through so the grip will get acknowledged by the Black Box, then calibrate it.
Here's the guide for SCG and here for the MCGU.
Even if you're saying the MCGU works well I still suggest to get through the procedure as explained in the guides, because even if the grip profile is laid out properly, you still need to calibrate it.

BB3 LEDs once Defaulted and Calibrated properly should show.
SYS LED Blue
1 LED Green
2 LED Green
3 LED Off (I believe 3 LED is for a secondary S BUS Connection)

Thanks. got it working.

What I did wrong --> I followed a calibration link (in the video comments) from the MK4 Unboxing + set up guide on video. The link brought me to the MK3 calibration. I was trying to set it up like you would a gunfighter MK3. I didn't realise that the approach was different for MK4!

Just in case others also do this!

Cheers