I have 2x Gunfighter MK 4's
They are connected with 2 blackbox MK3's
the 2 grips i have are the MCGU and the Kosmosima Grip.
The MCGU is set up fine. With 1 yellow light and 2 green lights.
The Kosmosima isn't working - it has 1 yellow, 1 green and 1 red light.
Not sure what the next steps are - as i understand it, the blackbox detects the device correctly and flashes itself. And should just work
Any idea on next steps / troubleshooting?
thanks
Gunfighter MK4 + Blackbox MK3 - Red Light Flashing
Moderator: AdminGroup
- fallout9
- Posts: 5222
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1225 times
Re: Gunfighter MK4 + Blackbox MK3 - Red Light Flashing
There's a buttons sequence you'll have to get through so the grip will get acknowledged by the Black Box, then calibrate it.
Here's the guide for SCG and here for the MCGU.
Even if you're saying the MCGU works well I still suggest to get through the procedure as explained in the guides, because even if the grip profile is laid out properly, you still need to calibrate it.
Here's the guide for SCG and here for the MCGU.
Even if you're saying the MCGU works well I still suggest to get through the procedure as explained in the guides, because even if the grip profile is laid out properly, you still need to calibrate it.
- DeadWalking
- Posts: 103
- Joined: Fri Jun 24, 2022 4:51
- Has thanked: 66 times
- Been thanked: 15 times
Re: Gunfighter MK4 + Blackbox MK3 - Red Light Flashing
BB3 LEDs once Defaulted and Calibrated properly should show.
SYS LED Blue
1 LED Green
2 LED Green
3 LED Off (I believe 3 LED is for a secondary S BUS Connection)
SYS LED Blue
1 LED Green
2 LED Green
3 LED Off (I believe 3 LED is for a secondary S BUS Connection)
Re: Gunfighter MK4 + Blackbox MK3 - Red Light Flashing
Thanks. got it working.
What I did wrong --> I followed a calibration link (in the video comments) from the MK4 Unboxing + set up guide on video. The link brought me to the MK3 calibration. I was trying to set it up like you would a gunfighter MK3. I didn't realise that the approach was different for MK4!
Just in case others also do this!
Cheers
What I did wrong --> I followed a calibration link (in the video comments) from the MK4 Unboxing + set up guide on video. The link brought me to the MK3 calibration. I was trying to set it up like you would a gunfighter MK3. I didn't realise that the approach was different for MK4!
Just in case others also do this!
Cheers
Who is online
Users browsing this forum: No registered users and 6 guests