VKB-SIM

I have the aforementioned system as Hid Composite Device and I'm trying to program subshifts with ButtonS:es. Strangely the buttons turn up as BM or buttonM:s. I know this has been reported earlier,so I hope this will be remedied as soon as possible.
I've used the latest official and beta versions but to no avail.

Is there earlier firmware version that works properly ?

Please report your FW&SW versions.

I have tried firmware version 2.12.2 and 2.13.9. VkbConvig versions 0.92.51 and 0.92.65. And I have no clue what this buttonM or Modal Switch is, as there is no documentation. There is another message:

viewtopic.php?f=27&p=58435

Jusu

Subshifts work. 2.13A, 92.67

Thank you for the answer. I'm afraid it still doesn't work. ButtonS only accepts the following button number. If I try to change it to another free number, the BM pops up again. I use Gladiator NXT with THQ and SEM, I made a mistake in my title, sorry about that.
I attach two pictures of the VKBConfig.

Jusu

I figured it out. Seems to be working. I had to leave the V.button as is and select the free number in BUT1.

Jusu

Still doesn't work properly. Cannot use Subshift 2-7. BMs popping up.

I am very intrigued about subshift funcionality. It drove me crazy trying to learn to use it when I tried it with v0.92.51 until I realized that there were a bug. I hope the bug be corrected soon, to know how to take advantage of it.

EDIT: by the way, where can I download 92.67? I was looking at https://vkbcontrollers.com/pages/downloads but the last version is 92.51

Seems to me they have removed the "unofficial" software. The link leads to the american website. What happened?

Look here http://alex-oz.strana.de/index.htm

Victorus wrote:Subshifts work. 2.13A, 92.67

Unfortunately I am still running into this issue using the above firmware/ Dev Cfg version

I can confirm this issue.

Jusu

Just got an omni throttle and I'm having this issue. When I try to use buttonS it changes to BM when I try to set the V. Button.

firmware - v2.14.A
VKB Device Config v0.92.79

Please check the conversation above; there's an issue with the subShift control in the latest version; just use the ones indicated by Victorus above.

aosmiles wrote:Just got an omni throttle and I'm having this issue. When I try to use buttonS it changes to BM when I try to set the V. Button.

firmware - v2.14.A
VKB Device Config v0.92.79

You can still utilize subShifts, but via Modal Switch Boolean and leveraging it's ability to be triggered by subShifts.
Then use ButtonM to setup your subShifted Logicals.
http://forum.vkb-sim.pro/viewtopic.php?f=27&t=7537