Axis are inverted natively
Moderator: AdminGroup
-
- Posts: 9
- Joined: Thu Dec 08, 2022 7:41
Axis are inverted natively
Hi, I would like to ask for some help with my Gladiator NXT EVO that I recently purchased. The product was actually working fine for a week since I got it. However today when I was trying to configure trimming functions on some buttons the joystick did something weird and it inverted all of its axis. I have tried updating to the latest firmware, which by the way already had it installed since I got it so recently. The only solution I could achieve for now was clicking the "R" box in the profile axis for VKB device config software. However I don't feel too good about the product not working properly. Even if I check on windows game devices it will actually show me the same reversed input for the axis which is pretty frustrating, any solution for this? I have also tried the F1+F2 hold, connect, chime and release.
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Axis are inverted natively
These are simple values which could be controlled through software, there's nothing wrong with reversing axes' values.
-
- Posts: 9
- Joined: Thu Dec 08, 2022 7:41
Re: Axis are inverted natively
I have actually fixed it now, the seller sent me the latest firmware which does take into account this "feature" on some joysticks that have inverted axis.
Re: Axis are inverted natively
I have just got my evo and have the same issue. Can you explain where the R button is to invert this or the firmware you were sent that solved the issue. thanks
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Axis are inverted natively
Run VKBDevCfg, select your EVO, navigate to Profile/Axes/Physical Axes and inverse the selection on the R column (if first axis has R unchecked - check it and if second axis has R checked - uncheck it or the other way around), then press Set and calibrate.
-
- Posts: 9
- Joined: Thu Dec 08, 2022 7:41
Re: Axis are inverted natively
fuzzydog wrote:I have just got my evo and have the same issue. Can you explain where the R button is to invert this or the firmware you were sent that solved the issue. thanks
Hey sorry for the late reply. Sure man here's the link
https://onedrive.live.com/?spm=a2g0s%2E ... F29CE7DF25
There are two versions. The difference between _kmz41 and non _kmz41 version is X, Y axis reverse. So please have a try.
Who is online
Users browsing this forum: No registered users and 105 guests