Axis are inverted natively

Moderator: AdminGroup

DonJuan247
Posts: 9
Joined: Thu Dec 08, 2022 7:41

Axis are inverted natively

Postby DonJuan247 » Thu Dec 08, 2022 7:52

Hi, I would like to ask for some help with my Gladiator NXT EVO that I recently purchased. The product was actually working fine for a week since I got it. However today when I was trying to configure trimming functions on some buttons the joystick did something weird and it inverted all of its axis. I have tried updating to the latest firmware, which by the way already had it installed since I got it so recently. The only solution I could achieve for now was clicking the "R" box in the profile axis for VKB device config software. However I don't feel too good about the product not working properly. Even if I check on windows game devices it will actually show me the same reversed input for the axis which is pretty frustrating, any solution for this? I have also tried the F1+F2 hold, connect, chime and release.

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Axis are inverted natively

Postby fallout9 » Thu Dec 08, 2022 11:54

These are simple values which could be controlled through software, there's nothing wrong with reversing axes' values.

DonJuan247
Posts: 9
Joined: Thu Dec 08, 2022 7:41

Re: Axis are inverted natively

Postby DonJuan247 » Thu Dec 08, 2022 19:32

I have actually fixed it now, the seller sent me the latest firmware which does take into account this "feature" on some joysticks that have inverted axis.

fuzzydog
Posts: 2
Joined: Tue Dec 20, 2022 22:05
Has thanked: 1 time

Re: Axis are inverted natively

Postby fuzzydog » Tue Dec 20, 2022 22:08

I have just got my evo and have the same issue. Can you explain where the R button is to invert this or the firmware you were sent that solved the issue. thanks

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Axis are inverted natively

Postby fallout9 » Wed Dec 21, 2022 10:40

Run VKBDevCfg, select your EVO, navigate to Profile/Axes/Physical Axes and inverse the selection on the R column (if first axis has R unchecked - check it and if second axis has R checked - uncheck it or the other way around), then press Set and calibrate.
Attachments
Screenshot 2022-12-20 233708.png

DonJuan247
Posts: 9
Joined: Thu Dec 08, 2022 7:41

Re: Axis are inverted natively

Postby DonJuan247 » Thu Dec 22, 2022 8:15

fuzzydog wrote:I have just got my evo and have the same issue. Can you explain where the R button is to invert this or the firmware you were sent that solved the issue. thanks

Hey sorry for the late reply. Sure man here's the link
https://onedrive.live.com/?spm=a2g0s%2E ... F29CE7DF25
There are two versions. The difference between _kmz41 and non _kmz41 version is X, Y axis reverse. So please have a try.

fuzzydog
Posts: 2
Joined: Tue Dec 20, 2022 22:05
Has thanked: 1 time

Re: Axis are inverted natively

Postby fuzzydog » Thu Dec 22, 2022 16:50

Thanks chaps!


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 31 guests