Hello,
I've used the Gladiator NXT for a few weeks and love it. I decided to add a SEM and THQ with WWII grip. I've followed every single video and blog and downloaded the latest firmware and configurator. I set the THQ to use subaddress 4. All buttons work for me on NXT, THQ and SEM. However the throttle and remaining axis do not work on the THQ. I've spent about 8 hours trying to figure it out but I've exhausted my guesswork and patience.
I flashed the devices using the latest downloads. Oddly, the only one I could get to work set my device as EVO OT KG12 SEM THQ XT v2.115 ( I don't recall seeing EVO OT when I just had the NXT). After configuring, it's showing Err-Stat Active. I don't know what that means.
I've attached 6 screenshots of various Configurator screens hoping that helps assess my situation.
Thank You.
Looking forward to help.
M
WWII Throttle axis and remaining THQ axis do not work
Moderator: AdminGroup
-
- Posts: 7
- Joined: Thu Nov 10, 2022 8:19
- Has thanked: 3 times
- fallout9
- Posts: 5158
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 207 times
- Been thanked: 1217 times
Re: WWII Throttle axis and remaining THQ axis do not work
Please upgrade your firmware like here: viewtopic.php?t=7120
-
- Posts: 7
- Joined: Thu Nov 10, 2022 8:19
- Has thanked: 3 times
Re: WWII Throttle axis and remaining THQ axis do not work
Hello amd thank you for quick response.
Yes, I had read through that thread and followed the instructions. However, that version of the firmware will not work for me. I get the following message from the bootloader.
Yes, I had read through that thread and followed the instructions. However, that version of the firmware will not work for me. I get the following message from the bootloader.
- Attachments
-
- Posts: 7
- Joined: Thu Nov 10, 2022 8:19
- Has thanked: 3 times
Re: WWII Throttle axis and remaining THQ axis do not work
Just an fyi.
I've tried every flash file and the only ones that work are the two circled in red. I even tried what appear to be NXT files from Alex Oz's site.
M
I've tried every flash file and the only ones that work are the two circled in red. I even tried what appear to be NXT files from Alex Oz's site.
M
-
- Posts: 7
- Joined: Thu Nov 10, 2022 8:19
- Has thanked: 3 times
Re: WWII Throttle axis and remaining THQ axis do not work
I should also add that my NXT is the KG12 version with WWII grip.
- fallout9
- Posts: 5158
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 207 times
- Been thanked: 1217 times
Re: WWII Throttle axis and remaining THQ axis do not work
Sorry, my mistake, that was for NXT, not EVO.
This is the right firmware for you:
This is the right firmware for you:
- Attachments
-
- _Gladiator_EVO_v2_12_2 (1).zip
- (81.12 KiB) Downloaded 32 times
-
- Posts: 7
- Joined: Thu Nov 10, 2022 8:19
- Has thanked: 3 times
Re: WWII Throttle axis and remaining THQ axis do not work
That did the trick!
Phew. Thank you so much.
I will say though it took a few times of running Bootloader, defaulting, calibrating, etc to make it all stick. But in the end, it's working great.
Again, thank you so much for rapid response.
Phew. Thank you so much.
I will say though it took a few times of running Bootloader, defaulting, calibrating, etc to make it all stick. But in the end, it's working great.
Again, thank you so much for rapid response.
- fallout9
- Posts: 5158
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 207 times
- Been thanked: 1217 times
Who is online
Users browsing this forum: Skood and 19 guests