VKB-SIM

Hello,

I just received my Gladiator NXT EVO, the product looks and smells good, as expected

So I set it up using the YT tutorial and, while tightening the screw on the X-axis dry clutch, nothing changes.
The Y-axis dampens as expected though, so I decide to take the unit apart.

On the first picture, it seems that a screw is missing (red arrow) to secure the clutch.
I took a higher resolution picture to show that the hole is new and hasn't been threaded yet.

That would explain my problem and the product being new, I thought I'd ask before attempting anything else.
The base comes with an extra set of screws that are not covered in the tutorial, should I use them? It's not going to explode, is it?

Regards,

Could you post a pic with all the screws that you still have?
The missing one should be a M 2.5 x 10mm self tapping screw, same like the other 2 black screws in your pic on the pitch axis.

Thank you for the fast reply.

I still have a bag with the mentioned screws indeed, I used one and the problem went away.
The stick is now fully calibrated and operational

I assume the bag on the right is to lock in the twist of the grip?

Good to hear You're right, that's the twist locking bolt and the rubber cylinders are extenders for the side button on the KG12.