VKB-SIM

I have a Gladiator EVO and the WWII THQ+SEM-V combo plugged into the same powered USB hub that my T-Rudder and several other devices are plugged into. When I turn on my computer, just the Gladiator and THQ (not connected to Gladiator) don't power on. I unplug them and replug them both and all is well. Everything else in the hub powers on normally. No USB's are set to go to sleep. I don't have any open USB's to plug directly into the motherboard permanently, nor are the cables long enough to reach. It's a minor inconvenience, but one I'd like to resolve. Any ideas?

BTW, I'm coming from a Microsoft FFB2 that I purchased when they upgraded from the serial or PS/2 plug to the new fangled USB technology. I think I bought it before my daughter was born, and I have two grandkids now. I miss the force feedback, but wow is this new VKB stuff great.

Test them both plugged directly to the computer; this will tell if it’s an issue with that powered USB. Might also be an issue with your power supply unit, if there are too many devices plugged in.

OK, I tried that. Works fine now. I can't leave it that way, but it's not a joystick problem, I'll figure it out. Thanks for your help.

i have the same problem if you moved to another USB con. that will to is i had ro reconnect mine to the same connections i used befor movin the .i moved the back and i have power now often i have to disconnect the sticks and let them go thru installation again but that a real pain let me know if you overcome this error/errors

Sorry Adder, not clear what's not working, could you be more specific?

I was stupid.. must learn to follow instruction. was an easy fix, i removed the units from my pc deleted everything then re attached then dl the vkb firmware