VKB-SIM

Is it possible to have a different curve or saturation on the forward half of my pitch axis then on the back half? I'd like the pitch back portion of my stick to remain the same, but I'd like to cut the saturation of the pitch down half of the joysticks range? Is this possible using VKBs software. Currently I can only see how to change the curve of both halves symmetrically.

This can be achieved by calibration without using the curves in the configurator.
For example, with an extension cord, the range of movement of the grip from one extreme point to another increases.
And a situation is possible when the grip will rest against the hips of the legs (along the X axis) placed on the pedals.
Although it has not yet reached the stop in the mechanics.
Therefore, when calibrating, set the extreme points of the range that are convenient for you. That is, if, when calibrating along the Y axis, move the grip from the center forward by 3 cm, and towards yourself completely (until the mechanics stop), then the controller will stretch this range from 0 to 65535 (from the extreme points), but with different "curves".
Try to calibrate the axes with the Profile-Axes tab open, and then you will see how the KdHi, KdLo numbers change after a reboot, with this method.

Worked perfect, thanks!