MCGU and Firmware 2.10.5
Posted: Fri Apr 15, 2022 10:53
Hi there,
Here is a short experience report for the new, unofficial firmware 2.10.5:
I don't know if it's something on my side, but my MCGU doesn't work with firmware 2.10.5.
After flashing, everything works fine, but after the PC has been switched off for a while, it no longer works. It is active and recognised, but it does not send buttons or axes.
Flashing the MCGU back to 2.09 everything is normal again.
Only the MCGU and T-Rudder (both Blackbox MK II) are affected, SEM, THQ and FSM-GA seem to work fine with 2.10.5.
Happy easter and best regards,
InvaderZim
Here is a short experience report for the new, unofficial firmware 2.10.5:
I don't know if it's something on my side, but my MCGU doesn't work with firmware 2.10.5.
After flashing, everything works fine, but after the PC has been switched off for a while, it no longer works. It is active and recognised, but it does not send buttons or axes.
Flashing the MCGU back to 2.09 everything is normal again.
Only the MCGU and T-Rudder (both Blackbox MK II) are affected, SEM, THQ and FSM-GA seem to work fine with 2.10.5.
Happy easter and best regards,
InvaderZim
. Since these are test firmware, use the more stable, previous ones.