SEM LED Event with Logical Keyboard

Moderator: AdminGroup

20vmki
Posts: 1
Joined: Mon Apr 04, 2022 19:46

SEM LED Event with Logical Keyboard

Postby 20vmki » Mon Apr 04, 2022 20:02

I setup my A1 button on the SEM as follows:

  • On press and release of A1 the L Alt and L Ctrl keys would be held down.
  • On the next press and release of A1 the L Alt and L Ctrl keys would be released.
I was able to do this by changing the physical button to type ButAlt and changing the logical layer to Keyboard, using KEY_************ and checking LEFT Ctrl and LEFT Alt.

All worked well.

Next I wanted to make the LED next to A1 flash RED during the first state above, but it appears, because I changed from a logical button to a keyboard for physical button A1, I no longer had an event trigger that would keep the LED flashing.

I tried tying the event to the physical button, but that only succeeded in making the LED flash when A1 was depressed.

Any suggestions on how I could get the LED to say flashing red until A1 is pressed and released a second time?

Many thanks.

Eric

Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 36 guests