New system not having enough axes

Moderator: AdminGroup

User avatar
fallout9
Posts: 5160
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: New system not having enough axes

Postby fallout9 » Mon Aug 08, 2022 9:50

Check Global/Common panel, under VC is 1 or No? If it's No, then set it to 1 and press Set.

Mozza
Posts: 20
Joined: Wed Mar 30, 2022 14:32

Re: New system not having enough axes

Postby Mozza » Tue Aug 09, 2022 11:02

Unfortunately, it was already set to 1. I'm thinking at this stage, my best bet is to separate them electronically, and run the stick as a separate device, with the HID in the SEM
Plane go brrr

User avatar
fallout9
Posts: 5160
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: New system not having enough axes

Postby fallout9 » Tue Aug 09, 2022 21:27

Should work though. Let's do a new round of screenshots, please post the following:
1. GlobalCommon;
2. Global/External, 1 screenshot with each device selected;
3. Profile/Axes/Logical axes showing axes 1-8;
4. Profile/Axes/Logical axes showing axes 9-16;

Mozza
Posts: 20
Joined: Wed Mar 30, 2022 14:32

Re: New system not having enough axes

Postby Mozza » Thu Aug 11, 2022 14:58

More screenshots
Attachments
Profile axes 9-16.png
Profile axes 1-8.png
Profile axes 9-16.png
Global external THQ2.png
Global external THQ1.png
Global external SEM.png
Global external KG12.png
Global common.png
Plane go brrr

Mozza
Posts: 20
Joined: Wed Mar 30, 2022 14:32

Re: New system not having enough axes

Postby Mozza » Tue Aug 30, 2022 14:53

If anyone else is able to help on this, it'd be greatly appreciated
Plane go brrr

Ron61
Posts: 3263
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: New system not having enough axes

Postby Ron61 » Wed Aug 31, 2022 10:45

I advise you to update the firmware not lower than the recommended one (in the header of the configurator it is indicated in brackets). then reconfigure the device and calibrate.
When preparing screenshots, you should not scroll through the list of axes in logical ones, you can simply select the second virtual controller VC1 or VC2 under the Load button. So that the axes in the logical ones coincide with the physical ones.
Remind me what the main problem is?

User avatar
fallout9
Posts: 5160
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: New system not having enough axes

Postby fallout9 » Tue Sep 13, 2022 20:54

Fixed by firmware.


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 34 guests