VKB-SIM

Hello! After update to 2,09 for the gladiator NXT When i activate f13-f24 on the left joystick it gets renamed from left to right in the Software. When i reset the joystick it jumpa back to left again.

Tried this with the same result for 5x times.

Everything works, But yeah

Follow these steps:
1. Download the configurator;
2. Download the bootloader;
3. Download the firmware package;
4. Unzip all the 3 files in the same folder;
5. Launch VKBDevCfg as Admin and click the Bootloader button under Tools tab;
6. Navigate to the firmware file folder and load up the file called _Gladiator_NXT_v2_09_0.vkb;
7. After the bootloader finishes the flashing process launch VKBDevCfg and click the Default button under Tools tab;
8. Navigate to Global/Devices/External Devices and press the Find&AutoConfig button;
9. Go to Test/Axes1 tab and click on the Start Calibr button;
10. Move your pitch, roll and yaw axes all the way, slowly at the end;
11. Move the mini-throttle up and down;
12. Press the A1 ministick center button and when the LED turns red move the ministick all over;
13. Press the End Calibr button.

Thank you, i needed under external devices to set it manually to SCG-L and now it works fine

Does the ministick works, can you switch modes?

The left is not a premium.. but strange things have happen
when i click the fire (button 1) on the joystick. on the button tester the button 10 reacts. same in game

Number of button doesn't matter that much, as long as the button works. But I still suggest to follow the above steps.