VKB-SIM

Hi, need help please, I don't seem able to switch between modes Red/Green with my Gladiator MKII kosmosima. I've just updated the firmware but not sure if it was switching modes before that as its boxed up as a spare.

After changing the firmware, it is recommended to reset the settings with the Default button and re-calibrate the axes. Show the Profile-Buttons tab from the configurator. If the problem persists, you should save the profile (Save) and attach it here in * .zip.

Hi, Thanks for the reply. Done all the reset the settings, Default button and re-calibrate. The green light is comming on when flashing firmware and during the re-calibrate and the mode button is showing as working in the button test.

And how do I know which firmware and configurator versions are in use?
There are no assignments by default. Therefore, you need to create your own profile.
In the version with the KG-12 grip, an additional Shift + Pinky mode was needed due to the small number of buttons on the grip.

I used the latest firmware VKB Device Firmware (v2.09.0 XT) and VKBDevCfg (v0.92.17) and flashed with this file_Gladiator_SCG_v2_09_0.vkb. I always flashed the firmware, set to default and re-calibrated which always worked with my Gladiator MkII with KG12 grip, set it back to Factory default. I never mess with any other settings in the VKBDevCfg software, any button profiles I do in game. My Rudder pedals updated fine. My settings with my Kosmosima grip should be default as I never really used it, I thought I would update before I started to use it now. Not sure if this helps but this is the limited edition Gladiator MkII SCG with the removable grip Rev,B socket type.

This is the layout with the KG-12.

By changing it to SCG and changing the firmware, the knob registers are added to the basic buttons.

And only the central button of the ministick is configured, like the axis/HAT switch.
If you want to customize the Mode button on the base, then you need to do it yourself. Naturally, this also applies to Leds.

Sorry, little confused. All buttons match up and working as the KG12 base buttons profile picture you provided including the mode button which lights red when engaged (see picture) but doesn't change the mode setting on the stick base or between the red and green led's. Not sure how to change.

What do you want to do with the Mode button?
Can you describe the task more specifically?

Just do what its meant to do, to switch between mode1 red and mode 2 green so i can assign the base unit buttons for 2 different operations in game software not VKB software

I think you want this, just follow the walkthrough.

Thank you both so much Ron61 and fallout9. That's just what I wanted and it works a treat. Very Happy