Gladiator NXT, inputs not recognized & grip screw issues

Moderator: AdminGroup

mikek1357
Posts: 3
Joined: Thu Dec 02, 2021 14:46
Has thanked: 1 time
Been thanked: 1 time

Gladiator NXT, inputs not recognized & grip screw issues

Postby mikek1357 » Mon Dec 06, 2021 10:50

Hi folks,

Not really a request for help and this might even have been put on the board before.

I had two minor issues with my Gladiator NXT after receiving it.

The 3 screw of the grip were not properly gripping, 2 out of 3 I could turn without it ever getting a good grip.

Solution: I took out the grip again, put it back on, pushed it down quite firmly, put a light against the screw holes to see if the holes of the base were flush against the screw holes in the grip. After this I could secure the grip properly

The other issue I had was analogue inputs not being recognized but all buttons working without issues.

Solution: Unscrew the base plate and reseat the grip connector. After this analogue inputs were detected as well.

Hope this might be a solution for people if you encounter these issues.

Return to “Technical Support”

Who is online

Users browsing this forum: Bing [Bot], Skood and 23 guests