VKB-SIM

Hello

Today I just got in, setup and configured my new FSM-GA+SEM+2THQ+GNX HID controller+MFH via using the videos you posted for the SEM and build guide for those specific modules;
https://www.youtube.com/watch?v=wv3A6pBPlNA and https://www.youtube.com/watch?v=JRftn8cBtyM for those who might be looking.
It seems to be working - now I just need to see how it integrates with the various sims.

However while going through the process of getting this setup it made me wonder if I'm running the latest firmware on these modules. The VKB Device CFG software shows the same as in the videos; 2.0.81 however, I noticed that there is a update for the "Gladiator NXT Firmware (v2.08.0.3) – Added NOV 9, 2021 – SUPPORTS GNX MODULES!" and then followed by the firmware package for all of the VKB devices that listed as "VKB Device Firmware (v2.07.1 XT) – ADDED SEP 22, 2021" and in here I do not see the new NXT SEM modules. Am I running the latest firmware for the SEM's? Also, I'm running 2 GF3 gimbals and not NXT's so I've got the SEM's running as a standalone addon using the method listed in the first video linked. in the future how will firmware be distributed so I can update this, will they be part of the NXT package or as a separate firmware maybe under the Gladiator NXT firmware?

Thanks

Actually you're not flashing each module independently, but the GNX HID controller. If you're running your modules through a controller, than flash the controller to the latest firmware. If you run them though a Gladiator NXT, flash the joystick to the latest firmware. In both cases you also need the latest native software too.

I set up all the SEM modules as that video I linked showed. All 4 are using the one GNX USB controller. So it sounds like that one controller gets updated.... However, that's my question; where is the firmware for this? on this page https://vkbcontrollers.com/?page_id=4609 it lists

Gladiator NXT Firmware (v2.08.0.3) – Added NOV 9, 2021 – SUPPORTS GNX MODULES!

and

VKB Device Firmware (v2.07.1 XT) – ADDED SEP 22, 2021

Neither of those two options contains the firmware when I tried, so where do I get the latest SEM firmware?

It's still in beta, it will get published as soon as it proves it's stable.

Ah ok, I assume it will be on the same page perhaps under a new spot or included in a all all vkb device firmware option?

Check now, it's just been updated. Get latest of firmware, software and bootloader. If you need further assistance with flashing please say so; flashing the modules is the same as flashing any other VKB device, but a guiding video will come out in a few days.