THQ added to a Gladiator NXT Premium, THQ only shows 2 axes, not 3.

[M4dSc13nc3]

Hi,
I just got my add on GNX-THQ and installed it onto my Gladiator NXT Premium left stick. I updated the firmware and it found the new throttle, but the joystick is already full of 8 axes without having the third axis on the THQ showing up anywhere in the software. What am I doing wrong?

[fallout9]

In Test/Axes1 tab, just above the cursors, there's a pull down menu. You're on the first device, when calibrating select the second device from there. Basically, you'll get a second virtual controller with just 1 axis.

[M4dSc13nc3]

Attached is a screenshot of what my test/axes 1 tab looks like, there is no drop down menu.

[fallout9]

Please follow these steps, you'll need to update the software and flash new firmware.

[M4dSc13nc3]

I figured it out, my software was old. With the newest versions it is recognizing everything it should, but now if i try to calibrate either of my gladiators, as soon as the calibration is finished, the sticks stop showing the gnx modules.

[M4dSc13nc3]

Thank you for the quick response Fallout, awesome stuff!

[fallout9]

What modules do you have? How are they connected? Are you sure you begin calibration with Start Calibr and finish it with End Calibr (not Cancel Calibr)?

[M4dSc13nc3]

I have a Gladiator NXT Premium Left with the Thq attached to the left side. It's wierd because whenever I hit default, the software shows 2 controllers and all the axes now. But as soon as I try to calibrate through the software, the second axes disappears and the joystick quits responding in the software.

[fallout9]

Please post the following screenshots:
Global/External/ExternalDevices
Profile/Axes/LogicalAxes and Physical Axes
Test/ExternalDevices

[M4dSc13nc3]

It's all working now, I hadn't done the find and auto config on that stick/thq setup. It was finding it anyway and without the auto config, i think the calibration was failing somehow. Thanks for all the help.

[cobra9delta]

Is there a way to get the third THQ axis onto one device and replace one of the two unused axis of the NXT?

[fallout9]

What do you mean? Gladiator NXT has 6 axes and the THQ 3; if you combine them you'll get 2 virtual controllers, first with 8 axes and second with 1. Are you asking if you could swap the axis from the second controller with one from the first controller?