Gunfighter MkIII MCE Ultimate has loose movement to the right before springs engage.
Posted: Mon Oct 25, 2021 3:32
by zeroready
I have the long extension. Using 50+40 springs. It feels like about 1/4 inch of movement to the right is happening with no spring tension, then I can feel the springs engage. The other 3 directions feel tight, under spring tension right away. It's only going to the right. It's registering the movement in axis binding.
Re: Gunfighter MkIII MCE Ultimate has loose movement to the right before springs engage.
Posted: Tue Oct 26, 2021 10:15
by fallout9
Hard to believe this would happen; if there was an issue it should be on the whole axis, not only on half - both springs and cam are affecting the whole axis the same. Easy to check with the
tester, just run it and see if the slider moves along with the grip movement.
You could also open up the base and see if everything it tightened up and
running smoothly.