Gunfighter Mk.II MCG RU flip up trigger behaves oddly

[Ron61]

Doesn't work with your profile. Therefore, first watch the video and then repeat with loading my profile. Just do everything exactly, please.

MCG trigger Test.rar

(2.08 KiB) Downloaded 96 times

[Remontti]

I've watched the video.
I set default. Then load your profile. All values look like in the video. But when I press Set the MPL values for axes 7 and 8 change in Profile/Axes/Physical Axes. Before Setting MPL value was 5 for both. After Setting they change to 10 and 9.

So I manually changed them back to 5 and press Set again.

And this is the curve I got.

[Remontti]

Here is video about loading your profile. You can see that those MPL values wont' set correctly at first.
My video capture doesn't seem to record the part where I choose your profile because it happens in a separate window.
https://youtu.be/75CEley6sqo

And here are the curves

[Ron61]

On your graph, you can see movements only from the center towards yourself. What happens when you roll from the center to the Safe position?
Use the latest configurator so that we have the same configuration.
Disable unnecessary axes in JoyTester for better clarity.

[Remontti]

Nothing happens when going from Armed to Safe position. The curve is flat.
There is only reaction in the curve when pressing the trigger, at the same moment I hear click from trigger.

[Ron61]

Try Hard reset (point 1.3) as described here.

[Remontti]

Are the Boot pins in the Black Box? I can't find them.
Or do I need to open joystick (base / grip)?

[Юрий]

[Remontti]

Ok, thanks

[Ron61]

You also need to visually check the reliability of the contacts of the microcircuits U1, U2 on the trigger axis board.

[Remontti]

I did the hard reset and then flashed with newest Firmware.

I'll open the grip now and take a look at trigger board.

[Remontti]

Do you mean this board? I can see R1 and R2, but not U1 and U2.

[Ron61]

О, main God! You have a simple grip MCG, no axis on the trigger, only buttons. Sorry.

[Remontti]

Well, mystery solved!

Now what, can I get a proper trigger board somehow?

And thank you. You went through a lot of trouble helping me.

[Ron61]

You can write to sales@vkb-sim.pro and ask for an upgrade to MCG Pro.