Gunfighter Mk.3 Ultimate not able to connect...

[fallout9]

k, let's try with a different version of the bootloader. Download this one (ver1.93) and delete all the prev bootloader file.

[Jerrygeez]

Same as before im afraid.. it just unplugs after the flash, and the flash itself goes really fast, when i tried on my laptop it took longer, felt like it actually transfered something then.

[fallout9]

Try to flash a different firmware, something for SCG grip for example.

[Jerrygeez]

Then i get "Device signature not correct - flash fail!"

[fallout9]

base is supposed to be disconnected from the BB, is it?

[Jerrygeez]

Yea it is not attached when i get "Device signature not correct - flash fail!"

[fallout9]

run zBootloader on screen and connect the BB (no base). take screenshot of zbootloader and post it please.

[Jerrygeez]

you want me to take screenshot when i flash it with the right file or any of the other? or just when its connected?

[fallout9]

just after it gets connected, want to see what's trying to load up.

[Jerrygeez]

[Jerrygeez]

Heres how VKBDeviceConfig looks after ive reconnected.

[fallout9]

with the zbootloader as in the first picture click mouse on the Found boot Device... line, then on the ... button. Select a random firmware and hit the Flash it! button. What device shows up in VKBDevCfg afterwards?

[Jerrygeez]

Well,. nothing, because i always have to disconnect and reconnect the usb using the "SYS" button on the BB for it to be recognized again, and then it just says "VKB Boot NJoy32 Platform v00.56 HID-compatible"

[Ron61]

When such an inscription appears in the configurator, it means that the BB is located and ready for flashing.
Now you need to start the firmware process by clicking the Bootloader button from the configurator (if the flasher file zBootloader.exe is located in the same configurator folder) or close the configurator and run zBootloader2.exe.
In the window that appears, select the firmware file with the button with three dots.

[Jerrygeez]

Yes i have done that multiple times but as i said before, it just eject itself after the flash, and im stuck repeating the same procedure over and over. I never get to the point that VKBDeviceConfig recognizes the device as "Gunfighter blabla..."
Im stuck in an endless loop...