Recently migrated to Ubuntu 20.04 from Windows, prior to that I successfully flashed it to the 2.05.5XT firmware with no issues. After the migration, Ubuntu detects the joystick and all of its buttons but none of the axes (X,Y,Z,Ministick, or Throttle). Doing the internal calibration does not fix this issue, and since no axes are detected by Ubuntu I can't do any mapping or adjusting via joystick or jstest.
Do I need to do some sort of factory reset on the stick, or is there a tool out there that I cannot find?
Ubuntu not detecting any axes in Gladiator NXT Premium Right
Moderator: AdminGroup
- fallout9
- Posts: 5182
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Ubuntu not detecting any axes in Gladiator NXT Premium Right
Most probably the joystick is fine, especially if the buttons work. I would try on specialized forums to find the proper settings under Ubuntu to have joysticks recognized.
Re: Ubuntu not detecting any axes in Gladiator NXT Premium Right
Hi
What's output from dmesg regarding joystick connection ?
In my case (Gladiator II) it looks like this:
Definitely some problem, but stick (axis + buttons) works fine.
gentoo, kernel 5.14.0
What's output from dmesg regarding joystick connection ?
In my case (Gladiator II) it looks like this:
Code: Select all
[ 9.590235] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 768 type 1
[ 9.590242] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 769 type 1
[ 9.590245] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 770 type 1
[ 9.590248] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 771 type 1
[ 9.590250] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 772 type 1
[ 9.590252] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 773 type 1
[ 9.590254] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 774 type 1
[ 9.590256] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 775 type 1
[ 9.590258] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 776 type 1
[ 9.590260] © Alex Oz 2012-2020 VKBsim Gladiator : Invalid code 777 type 1
[ 9.590415] input: © Alex Oz 2012-2020 VKBsim Gladiator as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:231D:0120.000C/input/input22
[ 9.590674] hid-generic 0003:231D:0120.000C: input,hidraw9: USB HID v1.11 Joystick [© Alex Oz 2012-2020 VKBsim Gladiator ] on usb-0000:00:14.0-5/input0
Definitely some problem, but stick (axis + buttons) works fine.
gentoo, kernel 5.14.0
Re: Ubuntu not detecting any axes in Gladiator NXT Premium Right
dmesg gives me this:
Running Ubuntu 20.04LTS, same kernel
Code: Select all
[ 2341.536743] usb 3-2: new full-speed USB device number 6 using xhci_hcd
[ 2341.713866] usb 3-2: New USB device found, idVendor=231d, idProduct=0200, bcdDevice=20.55
[ 2341.713872] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2341.713874] usb 3-2: Product: VKBsim Gladiator NXT R
[ 2341.713876] usb 3-2: Manufacturer: © Alex Oz 2012-2020
[ 2341.724143] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 768 type 1
[ 2341.724148] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 769 type 1
[ 2341.724149] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 770 type 1
[ 2341.724151] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 771 type 1
[ 2341.724152] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 772 type 1
[ 2341.724153] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 773 type 1
[ 2341.724154] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 774 type 1
[ 2341.724156] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 775 type 1
[ 2341.724157] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 776 type 1
[ 2341.724158] © Alex Oz 2012-2020 VKBsim Gladiator NXT R : Invalid code 777 type 1
[ 2341.724229] input: © Alex Oz 2012-2020 VKBsim Gladiator NXT R as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb3/3-2/3-2:1.0/0003:231D:0200.000E/input/input43
[ 2341.724352] hid-generic 0003:231D:0200.000E: input,hidraw13: USB HID v1.11 Joystick [© Alex Oz 2012-2020 VKBsim Gladiator NXT R ] on usb-0000:2a:00.1-2/input0
Running Ubuntu 20.04LTS, same kernel
Re: Ubuntu not detecting any axes in Gladiator NXT Premium Right
I assume on windows it works fine? Can you check it ?
jstest shows buttons only, no axes, right ?
jstest shows buttons only, no axes, right ?
Re: Ubuntu not detecting any axes in Gladiator NXT Premium Right
Correct, it worked just fine on Windows, but not since migrating.
I'm wondering if maybe something went wrong with the firmware update, is there a way to restore it to the old version without the software?
I'm wondering if maybe something went wrong with the firmware update, is there a way to restore it to the old version without the software?
Re: Ubuntu not detecting any axes in Gladiator NXT Premium Right
Paste screenshots from configuration of stick - maybe support will see any missconfiguration.
Now you can make topic "it doesn't work on windows", which should get more help from vkb .
Now you can make topic "it doesn't work on windows", which should get more help from vkb .
Who is online
Users browsing this forum: Bing [Bot] and 91 guests