GF III Dry clutch issue and cam roller not engaging fully
Posted: Wed Aug 11, 2021 16:57
Hi,
I started messing around with clutches today, I have not used this feature before and wanted to check it out. It appears the tightening screw is snagging on the clutch brakes, probably because the holes do not align properly. It seems the brakes holes push the screw to one end, and the upper hole of the frame have been threaded because of it (see picture). This causes the screw to just tighten the upper clutch brake and does not engage the spring at all. Can I drill this out myself without voiding warranty? Just to check if this will fix the issue? Was thinking of drilling out the hole in the frame as it has already been partly threaded.
https://1drv.ms/u/s!AggxpKbBrw3IwmXzp632ZsdT4HhI?e=ahOtjU
Also the cam roller on roll axis does not engage cam fully. I noticed this piece here sticking out a bit. I presume this is press-fitted, should this be flush with the frame? That distance would make the roller engage fully.
https://1drv.ms/u/s!AggxpKbBrw3IwmYXKl1iepKIkZyX?e=DBawtL
I started messing around with clutches today, I have not used this feature before and wanted to check it out. It appears the tightening screw is snagging on the clutch brakes, probably because the holes do not align properly. It seems the brakes holes push the screw to one end, and the upper hole of the frame have been threaded because of it (see picture). This causes the screw to just tighten the upper clutch brake and does not engage the spring at all. Can I drill this out myself without voiding warranty? Just to check if this will fix the issue? Was thinking of drilling out the hole in the frame as it has already been partly threaded.
https://1drv.ms/u/s!AggxpKbBrw3IwmXzp632ZsdT4HhI?e=ahOtjU
Also the cam roller on roll axis does not engage cam fully. I noticed this piece here sticking out a bit. I presume this is press-fitted, should this be flush with the frame? That distance would make the roller engage fully.
https://1drv.ms/u/s!AggxpKbBrw3IwmYXKl1iepKIkZyX?e=DBawtL