Page 1 of 1

Gladiator NXT HAT (Right one) not working

Posted: Tue Aug 10, 2021 5:19
by dfrontiera
I noticed today that my HAT on the right side of my left hand stick stopped working. (It's the standard not the premium version).
I tried to re-calibrate but that didn't work.
Any help would be greatly appreciated.

Re: Gladiator NXT HAT (Right one) not working

Posted: Tue Aug 10, 2021 5:49
by fallout9
Each HAT has a name beside it, which one is the one you're having problems with?

Re: Gladiator NXT HAT (Right one) not working

Posted: Tue Aug 10, 2021 6:53
by dfrontiera
Oh, A1 is the HAT I'm having issues with.

Re: Gladiator NXT HAT (Right one) not working

Posted: Tue Aug 10, 2021 7:28
by fallout9
Flash your left hand NXT with the firmware attached below.
1. Download the configurator;
2. Download the bootloader;
3. Download the attached firmware;
4. Unzip all the 3 files in the same folder;
5. Launch VKBDevCfg as Admin and click the Bootloader button under Tools tab;
6. Navigate to the firmware file folder and load it up;
7. After the bootloader finishes launch VKBDevCfg and click the Default button under Tools tab;
8. Go to Test/Axes1 tab and click on the Start Calibr button;
9. Move your pitch, roll and yaw axes all the way, slowly at the end;
10. Move the mini-throttle up and down;
11. Press the End Calibr button.

Re: Gladiator NXT HAT (Right one) not working

Posted: Tue Aug 10, 2021 17:02
by dfrontiera
That fixed the issue. Thank you!!