Hi,
The twist axis suddenly stopped working. I've reset to defaults, nothing happens on the axis test when I twist the grip.
It's the third issue I'm having with the MCGU since I got it last thursday, did I get a lemon?
MCGU - Twist axis not working anymore
Moderator: AdminGroup
Re: MCGU - Twist axis not working anymore
Ok, there are communication errors when I'm twisting back and forth, so there must be an issue with the cables in the twist adapter, or something else.
Last edited by mk2k21 on Sun May 16, 2021 22:33, edited 1 time in total.
Re: MCGU - Twist axis not working anymore
Open Test - Misc tab and press Check MARS button.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: MCGU - Twist axis not working anymore
Thanks, here is the result. Does that mean that the grip is faulty?
Re: MCGU - Twist axis not working anymore
I don’t know if it’s related but sometimes both leds on the grip would turn white for a short time.
Re: MCGU - Twist axis not working anymore
Try to reinstall the grip. May be communication errors cause problems.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: MCGU - Twist axis not working anymore
You are using beta firmware. We know about this bug and will soon be releasing an updated version.
But now you can use an official stable firmware for MCG-U http://ftp.vkb-sim.pro/Firmware/BlackBo ... 2_02_0.zip
P.S. Don't forget reset to default and calibrate the joystick after updating the firmware.
But now you can use an official stable firmware for MCG-U http://ftp.vkb-sim.pro/Firmware/BlackBo ... 2_02_0.zip
P.S. Don't forget reset to default and calibrate the joystick after updating the firmware.
Re: MCGU - Twist axis not working anymore
mk2k21 wrote:Same… still red error on MaRS #7
It's a pedals port. Of course you can see errors on MaRS #7 because the Blackbox can not connect to the T-Rudder MaRS sensor.
Re: MCGU - Twist axis not working anymore
As I’m away from home I’ll try this next Sunday. Thank you for the info, I hope it’s just a software problem
- ZERO_Thunder
- Posts: 42
- Joined: Thu Apr 25, 2019 5:04
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: MCGU - Twist axis not working anymore
Please change to this firmware and hit Default button in VKBDevCfg
https://vkbcontrollers.com/wp-content/uploads/2021/01/v2_02_52.zip
https://vkbcontrollers.com/wp-content/uploads/2021/01/v2_02_52.zip
- ZERO_Thunder
- Posts: 42
- Joined: Thu Apr 25, 2019 5:04
- Has thanked: 3 times
- Been thanked: 8 times
- Contact:
Re: MCGU - Twist axis not working anymore
The firmware you used may have configuration error so the twist won't work.
Try this one: https://vkbcontrollers.com/wp-content/uploads/2021/01/v2_02_52.zip
Try this one: https://vkbcontrollers.com/wp-content/uploads/2021/01/v2_02_52.zip
Re: MCGU - Twist axis not working anymore
Hi,
Downgrading to latest stable firmware (2.025) resolved the issue.
Thanks for the heads up! I will now edit my original message and remove the complaints that were unwarranted in retrospect
Downgrading to latest stable firmware (2.025) resolved the issue.
Thanks for the heads up! I will now edit my original message and remove the complaints that were unwarranted in retrospect
Who is online
Users browsing this forum: No registered users and 36 guests