Hello,
configuring my Gunfighter Mk.II vkb and making a Device Report,I have this warnnings:
Defined logical button#32 exceeds permitted HID button (27)
Defined logical button#33 exceeds permitted HID button (27)
Defined logical button#34 exceeds permitted HID button (27)
Defined logical button#35 exceeds permitted HID button (27)
¿what does it means?
Thanks
warning: Defined logical button exceeds permitted HID
Moderator: AdminGroup
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: warning: Defined logical button exceeds permitted HID
It means that whatever you tried to do it won't work as expected. Reset to default and try again. Checking the manual from time to time would definitely help.
Re: warning: Defined logical button exceeds permitted HID
Hello,
I can't find out why this error is getting, everything seems to works fine when I use the joestick...
I attach the parameters in an image.
Thanks!
I can't find out why this error is getting, everything seems to works fine when I use the joestick...
I attach the parameters in an image.
Thanks!
Re: warning: Defined logical button exceeds permitted HID
http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762
Please show screenshots of vkbdevcfg.exe. Common-Extenal tab. How many registers are enabled.
Please show screenshots of vkbdevcfg.exe. Common-Extenal tab. How many registers are enabled.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: warning: Defined logical button exceeds permitted HID
Does this work or should I send something else?
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: warning: Defined logical button exceeds permitted HID
Did you reset the Default button in the configurator? Judging by the screenshots provided, no. Make and calibrate all axes.
Show not cropped screenshots, but full ones, according to the height of the configurator window.
Show not cropped screenshots, but full ones, according to the height of the configurator window.
Re: warning: Defined logical button exceeds permitted HID
I had already applied the reset with the Default button, but have just done it again. After it, I have loaded my settings.
I attach the full screenshots.
Thanks!
I attach the full screenshots.
Thanks!
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: warning: Defined logical button exceeds permitted HID
If you reset to default, then load back your profile which seems full of errors then you're at the same stage as before. See this tutorial to understand how profiles works.
Re: warning: Defined logical button exceeds permitted HID
Why does it seem full of errors? When I work with it everything works correctly ...
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: warning: Defined logical button exceeds permitted HID
My statement is based on the first post of this thread. Looking at your screenshots it seems you've set up a limit of 27 buttons on your device. Whatever button programmed 28 and higher would trigger that kind of error. If you're asking why buttons over 27 gives you an error I assumed that you forgot the limit that you set up. I've also assumed that there are other wrong settings, that's why I recommended to reset to default.
Re: warning: Defined logical button exceeds permitted HID
Ok, I think Iunderstand the problem. I have increased the number of buttons to 35 and it no longer gives the error.
The point is that the 4-button trigger is assigned to the "virtual buttons" from 32 to 35, and it you shouldbe assigned to 24_27 if I want to keep the limit of 27 buttons.
The point is that the 4-button trigger is assigned to the "virtual buttons" from 32 to 35, and it you shouldbe assigned to 24_27 if I want to keep the limit of 27 buttons.
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: warning: Defined logical button exceeds permitted HID
Physical layer is what comes from the boards and logical layer is what is getting pushed to the tester/game. The connection between them could get changed as per user's desire.
For my curiosity - why would you want to limit your device to 27 buttons?
For my curiosity - why would you want to limit your device to 27 buttons?
Re: warning: Defined logical button exceeds permitted HID
Because I am not using the VKB software to map commands, I am doing that with Gremling, so I am interested in keep all very simple. .
I know that VKB shofware is more powerful, but currently I don't have time to study it as I would like, so I am going to what I already use.
I know that VKB shofware is more powerful, but currently I don't have time to study it as I would like, so I am going to what I already use.
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: warning: Defined logical button exceeds permitted HID
Then I would suggest to leave all the 128 buttons in there, it won't get in your way. The only reason to limit the buttons number is if you play older games (or Elite:Dangerous lol), where you need to break your joystick into several virtual controllers with a limited number of buttons.
Re: warning: Defined logical button exceeds permitted HID
Ok, I'll try your advice then. Thank you very much for the help, I has been really helpfull.
Who is online
Users browsing this forum: Bing [Bot] and 100 guests