VKB-SIM

Hello,

Ultimate is delivered with two changeable modules :
A. Mini stick module
B. Hat switch module.

Question : how do you distinguish MiniStick from HastSwitch ?

Changeable position on stick are :
SA. Master Mode
SB. Gate Cont.

Question is what can replace what ? What are authorized changed ?

Possible changes - which are allowed ?

1. all modules are interchangeable. Exemple MiniStick (A.) can replace Gate Cont or Master mode. Idem for HatSwtich (B.)
A. can replace SA. or SB. /// B. can replace SA. or SB.
2. MiniStick can only replace Master Mode and Hat Switch can only replace Gate Cont.
A. replaces SA. only /// B. replaces SB. only
3. Can I swap MasterMode and GateCont modules ? SA. can replace SB. ?

Thanks for helping.

Best regards.

The hat switches modules could replace any of the ministicks modules, in any position, both or single.

Hello,
Thank you. clearer now.

Br

Thanks for the clarification.

May we have the exact process to switch the module. I saw the video, but it didn't explain all.

Here is what I do, but don't know if it's right.

1- Unplug the USB cable.
2- Change the module.
3- Plug the USB cable.
4- Flash the firmware.
5- Calibrate the MCG Pro Ultimate.

Is that the right process ?

Do we need to calibrate after each swap ?

If you're properly flashed and calibrated and replacing at least 1 ministick with a HAT switch:
1. disconnect USB;
2. replace ministick(s);
3. plug USB;
4. play.

If you replace at least 1 HAT switch with a ministick:
1. disconnect USB;
2. replace HAT switch(es);
3. plug USB;
4. re-calibrate;
5. play.

Thank you for the answer.