Gunfighter 3 with SCG grip does not detect or flash

[Pittz74]

I have received a Gunfighter Mk.III with a SCG grip Mk.II BlackBox, I have plugged it in and followed this video. https://www.youtube.com/watch?v=mCajFZ9e9gw&feature=youtu.be
However when I load into the VKBDevCFG-C App all I can see is "VKB Boot NJoy32 platform v00.56, however according to the video I should be able to see the joystick itself as well.

When I run the bootloader I get this error messages popping up.

I am not sure if this is the correct file to flash cause I have looked everywhere and it doesn't tell you which firmware you are actually supposed to flash to the "VKB Boot NJoy32 platform v00.56".
I have also tried booting the VKBDevCFG with the reset button within the black box and following that procedure however this has not fixed anything.
I have also tried closing all background applications and then running it and this also has not fixed it.
Also I have tried several different USB ports and this also has not fixed it.
This is everything in the folder.

Has anyone had the same scenario and had a fix, or can anyone help.
Thanks.

[fallout9]

Click on the Boot platform in the device list, then click on the Restart button underneath. After the joystick restarts you can resume the flashing procedure.

[Ron61]

Read here.

[Pittz74]

Thanks. Just realised I wrote the OP as a gladiator. It’s actually a Gunfighter MK3 I have. Does the same advice apply

[Ron61]

There is no difference, it is suitable for any VKB device. Because the firmware procedure is the same for everyone.