Hey guys, today i received my Gunfighter MK III + Knüppelgriff KG12 - the problem comes with the latter one, the KG12 - it seems it has no contact with the base ??!!
I removed the dustcover but there is no way that the blackbox LED switches to green - switching back to MK III grip works fine.
Any ideas ?
Greetings Marc
Connection Problem Knüppelgriff KG12
Moderator: AdminGroup
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Connection Problem Knüppelgriff KG12
Open up the base and check the white connectors on the PCB, unplug and plug them back. Also check the wires feeding into those connectors.
Re: Connection Problem Knüppelgriff KG12
bevor i will do this, i think the base is ok ?! cause i can switch the MK III grip on the fly and the green LED starts to flash - so that means the base is ok or not ?
P.S. checked it, all connectors are fine and in place
P.S. checked it, all connectors are fine and in place
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Connection Problem Knüppelgriff KG12
Then how are you testing the KG12 to see it's not working? Have you flashed with the KG12 firmware?
Re: Connection Problem Knüppelgriff KG12
Ähm ok fresh start - i bought a Gunfighter Mk.III ‘Modern Combat Edition’ - that combination (stick and base) is working fine. When i connect the Stick, the green LED flashes and all buttons working.
BUT - i also ordered a KG12 grip ONLY - for the Gunfighter base (should be compatible right ? ) and THAT grip is not working with the base - red LED, no buttons at all.
BUT - i also ordered a KG12 grip ONLY - for the Gunfighter base (should be compatible right ? ) and THAT grip is not working with the base - red LED, no buttons at all.
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Connection Problem Knüppelgriff KG12
Alright, so every time you swap grips you have to re-flash the Black Box with the new grip. Here's how to flash for KG12 grip and this is how to flash for MCG/ MCG Pro grip.
There's also a new version of the software/firmware in beta these days which would allow swapping grips without re-flashing every time.
There's also a new version of the software/firmware in beta these days which would allow swapping grips without re-flashing every time.
Re: Connection Problem Knüppelgriff KG12
Oh really ? okay, i never read this anywhere i guess ... well thanx buddy ^^
Who is online
Users browsing this forum: Google [Bot] and 106 guests