MCG Pro 3 and rudder in the same Blackbox Toe brakes?

[Aviators]

Hi everyone, I own both the VKB MCG Pro 3 stick on MKIII, but also the T-Rudder MKIV. I connected everything on a single blackbox. How come I only see the stick? the rudders do not appear in the list.
How can I set the virtual brakes?
Using DCS World, by default I can correctly set the use of the rudders and the brake on the KA50 and L39, while on F16 and F18 I cannot use the differential brakes. What is the procedure? I tried to follow a guide on the forum, but it refers to a year ago and it doesn't work.

[fallout9]

When you connect both joystick and rudders through the same Black Box only the joystick appears in the device list; it's assimilating the rudders becoming a single device. In order to have the rudders working you'll have to calibrate the joystick as usual, but including the rudders too in the calibration - even if their name is not in the list, they're there, I assure you
Now for toe brakes/ differential brakes there are quite a few ways to achieve it, see for yourself and choose the best one for you:

viewtopic.php?f=25&t=3900&p=37820&hilit=toe+brakes#p37820
viewtopic.php?f=27&t=3570&p=35008&hilit=toe+brakes#p35008
viewtopic.php?f=25&t=4095
viewtopic.php?f=27&t=4045

Don't mind that some of the threads looks older, the principle of integrating the toe brakes is the same.

[Aviators]

i try this download/file.php?id=8230&mode=view

I want to take advantage of the MCG Pro 3 brake lever.
If I just press the lever, both brakes enter,
if I press the pedal, it starts to brake and tack only on the pressed side.

[Aviators]

doon't work. Why?

[Victorus]

Look here please http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762.
Show your screenshots of axes and buttons settings.

[Aviators]

Here are the screens:

[Aviators]

[Aviators]

[Ron61]

You need to be more careful about the settings.
One inaccurate parameter can stop correct operation.
Here you have two identical signs (+). And there should be (-). Change it and everything will work.

[Aviators]

Sorry, Changed, but it doesn't work. If I move the pedals without pressing the brake, the rudder moves correctly.
If I press the brake and step on the right pedal, both brakes are applied and the rudder moves to the right, if instead I press the brake and step on the left pedal, the two brakes do not apply.
I can't use the two differential brakes.

[Ron61]

Sorry, I looked at another bug. We don't have any extra axes, so we need to move them first. See here.
Add these lines to the zconfig.ini file.

[Aviators]

follow all instructions, it doesn't work. There continues to be the problem of sliders 1 and 2 braking and / or canceling the brake.

[Ron61]

Record a video from Test-axes1, where you first squeeze the brake lever and, without releasing it, press first to the right, then to the left of the pedal.

[Aviators]

My mistake. I configured the axes as the only brake. Slider 1 on left brake, Slider 2 on right brake, now everything works perfectly.
Ps I noticed that I lost the axes of the Master Mode. Is there any way to get it?

[Aviators]

also, I noticed that I lost the double functions of the keys by setting the trigger lever in the upper position.
Lever down, button 1 = button 1
Top lever, button 1 = button 43

ps, is there a way to switch between the various profiles? Example: MSFS, A10C, KA50 ,?