Hi.
I have the mkII with GFpro and that works fine, I can flash it and load cfg file.
I have just received the KG12 and I can not get any response from the buttons.
I unplugged the usb from box
I switched the grips
I plugged in the USB
I flashed the firmware with "_BlackBox_GF_KG_v1_98_F.vkb"
but i don't get any response from KG12.
When i check external device it seems to be communication error!
KG12 problem - no buttons (SOLVED)
Moderator: AdminGroup
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: KG12 problem - no buttons
Try with this firmware: https://mega.nz/folder/gx0mFQIR#ci756YS ... e/go8jTDDY (you have the orange Black Box right?) matched with this software: https://mega.nz/folder/Vk8AzAAR#eqrWwOz ... e/0stDhL5D
Follow the guide: https://youtu.be/fU4CbKhGm_w
Follow the guide: https://youtu.be/fU4CbKhGm_w
Re: KG12 problem - no buttons
I followed the video step by step ..
Upload firmware
Set to default
Calibrated axis and they work.. I still don't have any reactions from buttons.
I still have the screen that i attached before .. indicating "no communication"
Shall I try again with GF Pro stick??
Upload firmware
Set to default
Calibrated axis and they work.. I still don't have any reactions from buttons.
I still have the screen that i attached before .. indicating "no communication"
Shall I try again with GF Pro stick??
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: KG12 problem - no buttons
There is only one reason left - the physical contact of the grip and base. That is its absence. Carefully inspect the spring contacts for bending, seizing when recessed.
Re: KG12 problem - no buttons
And RED LED and comms error in config software.
https://drive.google.com/file/d/1GeWKAi ... sp=sharing
https://drive.google.com/file/d/1GeWKAi ... sp=sharing
Re: KG12 problem - no buttons
This I have done .. the axises are working just fine .. but NO BUTTONS are responding. Not inthe CKB configurator nor in DiView.
I have tried as Gladiator and also as KG12 .. same result. NO BUTTONS are responding
I have also reflashed with MCG stick and then all buttons and axises work.
https://drive.google.com/file/d/1TylcdG ... sp=sharing
I have tried as Gladiator and also as KG12 .. same result. NO BUTTONS are responding
I have also reflashed with MCG stick and then all buttons and axises work.
https://drive.google.com/file/d/1TylcdG ... sp=sharing
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: KG12 problem - no buttons
As long as there is no connection between the handle and the base, there can be no talk of any button operation. Have a tool and skills to measure the voltage at the connector?
Who is online
Users browsing this forum: No registered users and 115 guests