X axis stuttering

Moderator: AdminGroup

Post Reply
hijacked
Posts: 2
Joined: Thu Jan 23, 2020 10:22

X axis stuttering

Postby hijacked » Thu Jan 23, 2020 10:25

Hey guys,

Just wondering if anyone had any advice for a Gunfighter MK II w/ MCG Pro stuttering on the left side of the X axis, it also fails to return to center? Moving the stick to the right is fine.
Attached some screenshots of the VKB joytester showing the stutters.
Attachments
Scr200123151932.jpg
Scr200123152051.jpg
Top
Ron61
Posts: 3277
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: X axis stuttering

Postby Ron61 » Thu Jan 23, 2020 14:22

It is necessary to reconnect the X-axis sensor cable by removing the bottom cover. Moreover, from both ends. Then you can calibrate the axis again.
1, X and Y.png
Top
hijacked
Posts: 2
Joined: Thu Jan 23, 2020 10:22

Re: X axis stuttering

Postby hijacked » Thu Jan 23, 2020 16:37

Thank you very much! Seems to have done the trick.
Top
Ron61
Posts: 3277
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: X axis stuttering

Postby Ron61 » Thu Jan 23, 2020 21:40

You're welcome.
Top
Post Reply

Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 108 guests