VKB-SIM

joystick keep flashing redlight

all base button are works

first conncected SCG Grip flasing LED

all firmware upgrade (SGC-L )

I searched a lot of problems on VKB firmware method and I see that vkb's firmware has a lot of problems.

I searched all posts but didn't solve it


twist rudder axis not work

Without a reliable connection between the grip and the base, neither the button nor the axis on the grip will work. You don’t have it. This is evidenced by the red bar in the second screenshot. It is necessary to inspect carefully the spring contacts and wipe the contact pad with alcohol. Then tighten the grip on the base stock, without clearance. Until it changes to the green scale.

Thanks for the advice Ron61. It seems my SCG-premium-L softly disconnected while flying Elite Dangerous, resulting in the loss of twist axis, the box led flashing in red, and then all axes were gone. After unscrewing and tightening again the grip to the base, it works normally .