joystick keep flashing redlight
all base button are works
first conncected SCG Grip flasing LED
all firmware upgrade (SGC-L )
I searched a lot of problems on VKB firmware method and I see that vkb's firmware has a lot of problems.
I searched all posts but didn't solve it
twist rudder axis not work
VKB - GLADAITOR - SCG L not working
Moderator: AdminGroup
-
- Posts: 3276
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: VKB - ГЛАДАИТОР - SCG L не работает
Without a reliable connection between the grip and the base, neither the button nor the axis on the grip will work. You don’t have it. This is evidenced by the red bar in the second screenshot. It is necessary to inspect carefully the spring contacts and wipe the contact pad with alcohol. Then tighten the grip on the base stock, without clearance. Until it changes to the green scale.
Re: VKB - GLADAITOR - SCG L not working
Thanks for the advice Ron61. It seems my SCG-premium-L softly disconnected while flying Elite Dangerous, resulting in the loss of twist axis, the box led flashing in red, and then all axes were gone. After unscrewing and tightening again the grip to the base, it works normally .
Who is online
Users browsing this forum: No registered users and 88 guests