Flashing buttons

Moderator: AdminGroup

Eetsjone
Posts: 44
Joined: Tue Jan 17, 2017 13:23

Re: Flashing buttons

Postby Eetsjone » Sun Dec 08, 2019 19:04

On 0 I have vJoi driver. If you want I can uninstall it (again like yesterday/day before).

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Sun Dec 08, 2019 19:08

Required. And connect to USB 2.0 (black).

Eetsjone
Posts: 44
Joined: Tue Jan 17, 2017 13:23

Re: Flashing buttons

Postby Eetsjone » Sun Dec 08, 2019 19:15

vJoy removed, see JoyTester screen.
On motherboard Asus Maximus XI Extreme there is no 2.0 usb port. And, as stated, it has worked like that also on my previous board Asus Rampage V Edition 10. And as I stated yesterday, everything works perfect with the KG12.
Attachments
Scr191208171224.jpg

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Mon Dec 09, 2019 14:32

Swap two 3-pin connectors in the grip - so 1,2,7 is constantly on.

Eetsjone
Posts: 44
Joined: Tue Jan 17, 2017 13:23

Re: Flashing buttons

Postby Eetsjone » Mon Dec 09, 2019 16:16

Can you please explain?
Do you want me to swap the two 3 pin connectors that are placed next to the 7 pin connector? Because there is also a 3 pin connector on the bottom side.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Mon Dec 09, 2019 16:31

Just compare the cable layout with your earlier picture. That one was correct.

Eetsjone
Posts: 44
Joined: Tue Jan 17, 2017 13:23

Re: Flashing buttons

Postby Eetsjone » Mon Dec 09, 2019 16:53

I just compared, it is the same as in the picture from 5/12 and from 7/12. You can see both pictures in my posts. I did not swap any connector.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Mon Dec 09, 2019 17:07

Why, after assembly, do you always have buttons that were not like that before? I can only make assumptions.

Eetsjone
Posts: 44
Joined: Tue Jan 17, 2017 13:23

Re: Flashing buttons

Postby Eetsjone » Mon Dec 09, 2019 18:17

I do not know.
If you look at the screenshots it produces today you see that in the DevCfg screen the buttons are not frozen anymore.
But what you do see in both the screenshots of DevCfg and JoyTester that a lot of buttons are triggered by just moving the Y-axis back and forth, not touching anything else.
Attachments
DevCfg_20191209.JPG
Scr191209161123.jpg

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Mon Dec 09, 2019 18:25

Well, this is more like past behavior when moving the handle. We'll figure out.
Thanks.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Wed Dec 11, 2019 18:13

Look at your personal mail.

gbadzic
Posts: 10
Joined: Tue Oct 03, 2017 15:14

Re: Flashing buttons

Postby gbadzic » Sat Dec 14, 2019 19:47

Eetsjone wrote:@gbadzic, hope you get it solved. At my end it only got worse.

I've just tested this morning and after uploading the latest firmware I still have the same problem. Specifically it is buttons 18 and 23 that randomly flash as I move the joystick around. Those are "МАНЕВР" and "РК" push buttons. I wonder if there is more users with similar or same problem that just haven't noticed it because they do not use the buttons that randomly flash?

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Flashing buttons

Postby Ron61 » Sat Dec 14, 2019 21:46

Most likely you have the same problem - a loose fit grip. Try to install it more tightly, without a gap with the base.

User avatar
ZERO_Thunder
Posts: 42
Joined: Thu Apr 25, 2019 5:04
Has thanked: 3 times
Been thanked: 8 times
Contact:

Re: Flashing buttons

Postby ZERO_Thunder » Mon Jan 06, 2020 13:05

Please take a photo of 3-pin connector. Maybe the pin don't extented.

rtrski
Posts: 279
Joined: Mon Sep 11, 2017 0:20
Has thanked: 101 times
Been thanked: 135 times

Re: Flashing buttons

Postby rtrski » Mon Jan 06, 2020 16:00

I used to have this too (first generation 2017 Gunfighter II base). Since the upgrade to the Gunfighter III circuit boards, I have not re-experienced it.

The only things that was likely to have changed:

[list=]

[*]Better connection at the cable interface to the board (and of course one less cable now, since the X axis sensor is ON the connector board)

[*]I found some metal debris behind the X axis circuit board on the magnet when removing it and cleaned that off. Doubt that had anything to do with random button triggers, but more likely did have to do with occasional X axis misbehavior on first use after an idle week or so.

[/list]
RH VKB GF Mk III + Modern Combat Grip *ULTIMATE* (12/17 GFII , upgraded), _powered_ deploy!
LH VKB GF Mk III + Kosmosima Prem (02/19 GFII, upgraded), *lateral* mounted
Feet: Slaw Viper RX Pedals [Sorry, VKB, too gorgeous]


Return to “Technical Support”

Who is online

Users browsing this forum: KoN and 22 guests