VKB-SIM

1. Gunfighter Mk2 w/Kosmosima premium left
2. Firmware version: v1.96F
3. 1 x 30 spring for X and Y
4. 10 cam for X and Y
5. VKBdevcfg-C v0.90.28

Hi - I'm trying to achieve the following:

Short Press > virtual button x press
Long Press > virtual button y pulse generator

I've configured a physical button with tempo with #1 mapped to a button line and #2 mapped to generator line (e.g. G1). When testing this config #2 just behaves like normal button press. Am I doing something wrong or is combining tempo with generator a limitation with the software? FYI - Pulse generator works when I exclusively map it to a physical button.

Thanks

Example with Boolean function use.
But #7 - Tempo.
Second but - #8 - NoF!!!On logical and Physical layers.
But #1 - Boolean, Jumper. Operand1= VIRTUAL but #8, will be converted to physical button (generator works with physical layer buttons ONLY, straight assigning second Tempo button doesn't work - you found.
Operand 2 - button that will be "physical", #3.
But #3 - required generator G1.
Set.
Enjoy)))
In my test result 1st short press gives #23 - assigned logical line to physical #7 button. Second long - generator pulses.
Try.

Thanks Victorus,
That worked a treat. I would never have figured it out myself. This Boolean function makes my brain fart!!

Victorus wrote:Example with Boolean function use.
But #7 - Tempo.
Second but - #8 - NoF!!!On logical and Physical layers.
But #1 - Boolean, Jumper. Operand1= VIRTUAL but #8, will be converted to physical button (generator works with physical layer buttons ONLY, straight assigning second Tempo button doesn't work - you found.
Operand 2 - button that will be "physical", #3.
But #3 - required generator G1.
Set.
Enjoy)))
In my test result 1st short press gives #23 - assigned logical line to physical #7 button. Second long - generator pulses.
Try.