can i get a link for the 90.59 configurator....
cant find it
Left Hand SCG Pro: red Stick light flashing on Black Box [SOLVED]
Moderator: AdminGroup
- fallout9
- Posts: 5189
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
Cleaned the connectors ->flashing LED
Flashed 1977 left -> flashing LED
Default -> flashing LED
Start Calibrate -> flashing LED
changed External device to SCG/base.. to SCG/base L back and furth -> flashing LED
p.s.
Like i wrote bevor
the LEDs on the Grip itself lit up for a second after each BB restart
also.. if i put the left hand Grip on the Other/Right hand base... the light is still green... so its not a problem of the grip.. i guess
Flashed 1977 left -> flashing LED
Default -> flashing LED
Start Calibrate -> flashing LED
changed External device to SCG/base.. to SCG/base L back and furth -> flashing LED
p.s.
Like i wrote bevor
the LEDs on the Grip itself lit up for a second after each BB restart
also.. if i put the left hand Grip on the Other/Right hand base... the light is still green... so its not a problem of the grip.. i guess
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
No connection - everything else will come later.
And yet - pay attention to the highlighted in red. The question is - why is it wrong with you? So it should be after a reset in default.
We show the configurator folder.
And yet - pay attention to the highlighted in red. The question is - why is it wrong with you? So it should be after a reset in default.
We show the configurator folder.
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
With the handle installed (whether leds are lit on it or not - it doesn’t matter), reconnect the USB cable to the BlackBox.
And show the folder with the configurator.
And show the folder with the configurator.
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
no change.... even used the working cable from the ríght hand... still nothing
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
Try plugging it into another USB port, preferably 2.0.
Using the USBDeview program, select our device and uninstal it. After that, we reconnect, it will turn out like a bud for the first time.
Using the USBDeview program, select our device and uninstal it. After that, we reconnect, it will turn out like a bud for the first time.
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
still no change....
tryed 4 diffrent USB ports...
also the one where the righthand is working on...
did a new flash-default-calibrate step... still nothing
used the USBDeview...
disconnected-reconnected the USB cable
started VKB Device Config
did a new flash-default-calibrate step
still
tryed 4 diffrent USB ports...
also the one where the righthand is working on...
did a new flash-default-calibrate step... still nothing
used the USBDeview...
disconnected-reconnected the USB cable
started VKB Device Config
did a new flash-default-calibrate step
still
Last edited by Aasimar on Tue Aug 27, 2019 23:26, edited 1 time in total.
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
While there is no connection, there can be no talk of any calibration. Take a photo of the place where the grip sits on the rod.
We unscrew the bottom plate and reconnect the connectors, and that’s all.
We unscrew the bottom plate and reconnect the connectors, and that’s all.
Re: Left Hand SCG Pro: red Stick light flashing on Black Box
ahhh
The Black Cable on the front connector was not connected correctly... it was like 1mm out of the connector....
Have a green Stick light now...
Ty alot
will get on the whole calibrating train tomorrow
thanks for your time and expertise
The Black Cable on the front connector was not connected correctly... it was like 1mm out of the connector....
Have a green Stick light now...
Ty alot
will get on the whole calibrating train tomorrow
thanks for your time and expertise
Who is online
Users browsing this forum: Bing [Bot] and 112 guests