Hi,
I need some tips with putting back the spring to my rudder. I switched the long screw to the hole "High Force" next to the "normal" one but I have great difficulty putting the spring back in place now. I can stretch the spring with pliers but I can't quite push it to its place, because there is so little space inside the casing. I tried doing it from both ends of the spring and the cam end seems a little easier. What kind of a tool do you use for this when you assemble these?
Thanks in advance.
Edit: Hold on - I just realised it's probably possible to disassemble the casing quite easily and get THIS part out:
Edit2: OK I was able to remove it and it was EASY. Now switching the tension should be child's play, so problem solved. I'm leaving this here for everyone else to discover.
I have to admire the design of VKB T-Rudder. I was going to make my own from scratch (I'm a cockpit-builder) but I realised my own would probably cost more and be much too big.
T-Rudder MkIV tension change help needed
Moderator: AdminGroup
-
- Posts: 27
- Joined: Sun Jun 03, 2018 18:11
- Has thanked: 5 times
- Been thanked: 4 times
- ddrake1984
- Posts: 199
- Joined: Wed May 23, 2018 8:36
- Has thanked: 84 times
- Been thanked: 93 times
Re: T-Rudder MkIV tension change help needed
So you were able to adjust the force without having to adjust the tension to the cam????
Who is online
Users browsing this forum: No registered users and 14 guests