Hello,
I've had my Gunfighter Mk. II for just over a year now and did not have an issue when I first used this software with it, but as of now I cannot do anything with it.
Currently in Z-Bootloader this is what I am seeing (And after pressing reset):
My Gunfighter Mk. II is still recognized in Devices and Printers/Device Manager, inputs are showing as working, and works fine with any game. It is connected to a USB 3.0 port (tried 2.0 as well), Stick light is green, and SYS light is blue. I've tried shorting the boot pins, but it had no effect.
One thing I should mention is that within the stick itself one of the green wires is disconnected. I discovered this about a month after having it when I went to switch the springs out. However I didn't see any reason for concern as everything was working exactly as it should.
Show HID Device List
I would appreciate any help that could be given.
Thanks
Edit 1: Show HID Device List added
Device Disconnected (Config/Bootloader not recognizing)
Moderator: AdminGroup
Re: Device Disconnected (Config/Bootloader not recognizing)
http://ftp.vkb-sim.pro/Programms/show_hid.rar
Please post the screenshot from show_hid here
Please post the screenshot from show_hid here
Re: Device Disconnected (Config/Bootloader not recognizing)
I've added the HID Device List screenshot to the original post.
Thanks
Thanks
Re: Device Disconnected (Config/Bootloader not recognizing)
1) Your ZBootloader is too old. Please update to the new http://ftp.vkb-sim.pro/Programms/ZBootl ... 0v1_13.zip
2) For firmware update need to run VkbDevCFG and click on the "Bootloader" button http://ftp.vkb-sim.pro/Programms/VKBDev ... 83_9_6.zip
2) For firmware update need to run VkbDevCFG and click on the "Bootloader" button http://ftp.vkb-sim.pro/Programms/VKBDev ... 83_9_6.zip
Re: Device Disconnected (Config/Bootloader not recognizing)
Same result with the updated ZBootloader as in the original image. In the VkbDevCFG the "Bootloader" button is grayed out.
- fallout9
- Posts: 5184
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Device Disconnected (Config/Bootloader not recognizing)
Click the mouse on the name of your device in the upper box.
Re: Device Disconnected (Config/Bootloader not recognizing)
Well, I am incredibly stupid apparently. Didn't really think that was clickable (Probably should have gone back and read the instructions again too).
Sorry to waste your all's time on this, but that definitely solved it for me.
I really appreciate the help.
Sorry to waste your all's time on this, but that definitely solved it for me.
I really appreciate the help.
- fallout9
- Posts: 5184
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Device Disconnected (Config/Bootloader not recognizing)
Naw, the software could be a little intimidating at first, but with a little patience and research you'll discover how powerful it is.
Here's a guide I've made about flashing the firmware in case you'll run into trouble again: https://www.youtube.com/watch?v=8Ht8yMsdlCQ&t=
Here's a guide I've made about flashing the firmware in case you'll run into trouble again: https://www.youtube.com/watch?v=8Ht8yMsdlCQ&t=
Who is online
Users browsing this forum: No registered users and 59 guests