VKB Gladiator pro MKI - grip keeps twisting

Moderator: AdminGroup

blackram
Posts: 110
Joined: Tue Mar 13, 2018 15:26
Has thanked: 3 times
Been thanked: 14 times

VKB Gladiator pro MKI - grip keeps twisting

Postby blackram » Tue May 07, 2019 11:09

Hi, I would like to know if someone had this problem with his Gladiator pro. Since I migrated from twist stick to Gladiator pro MKI and rudder pedals, sometimes in fearce dogfight I unwittingly twist a grip a bit (I would say I didnt used much force). The grip then twists to the left considerably. I managed to solve the problem temporarly by just tightening the screw wich hold the grip on to the base (I tightened very, very firmly). After a while the grip twisted again. In the past I saw some similar topic on the net but I want to know if this is normal (I doubt). Visually, both the grip and the base looks and feels ok.

Sokol1
Posts: 193
Joined: Thu Jan 07, 2016 20:07
Has thanked: 4 times
Been thanked: 91 times

Re: VKB Gladiator pro MKI - grip keeps twisting

Postby Sokol1 » Tue May 07, 2019 17:24

Blue Loctite™. :mrgreen:

blackram
Posts: 110
Joined: Tue Mar 13, 2018 15:26
Has thanked: 3 times
Been thanked: 14 times

Re: VKB Gladiator pro MKI - grip keeps twisting

Postby blackram » Tue May 07, 2019 17:34

Yeah right, to superglue the removable grip on a 300$ joystick...

Sokol1
Posts: 193
Joined: Thu Jan 07, 2016 20:07
Has thanked: 4 times
Been thanked: 91 times

Re: VKB Gladiator pro MKI - grip keeps twisting

Postby Sokol1 » Tue May 07, 2019 21:59

This black two pieces of the lock mechanism is metal or plastic? If is plastic could be flexed due over tight and need be replaced:

Available in Aliexpress

BTW - The suggested Loctite™ is not the"Super Glue", but the threadlock (242), that is relatively easy to remove if need, but will make good effect if all pieces of the lock are in metal.

About use Loctite™ in a "$300" game controller*, why not? Is used even in thousand dollars machines. :wink:

* BTW - There are funny stories of people trying remove the CAM screws from the VPC gimbal, where was used Loctite™ red (243 or 270). :mrgreen:

blackram
Posts: 110
Joined: Tue Mar 13, 2018 15:26
Has thanked: 3 times
Been thanked: 14 times

Re: VKB Gladiator pro MKI - grip keeps twisting

Postby blackram » Wed May 08, 2019 20:51

On all pro Gladiators the lock mechanisam is metal. Like I said Im not the only one with this problem. What is irritating is that vkb stuff arent responding. Once you buy their product, specially if out of warranty, they just dont care...

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: VKB Gladiator pro MKI - grip keeps twisting

Postby AeroGator » Fri May 10, 2019 9:03

blackram wrote:Once you buy their product, specially if out of warranty, they just dont care...
Not a good beginning of a conversation. Help will come as soon as it can be delivered. There is no, and has never been, a promise of 24/7 live support.
Best Regards,
AeroGator

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: VKB Gladiator pro MKI - grip keeps twisting

Postby AeroGator » Fri May 10, 2019 9:31

Sand off equal amount of the rusks. Don't go too far, it will be not-undoable. 0.5 mm will be plenty.
Tighten the screw. Loctite won't hurt.
Happy flights.
Attachments
1371588831.jpg
1371588831.jpg
Best Regards,
AeroGator


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 60 guests