VKB Device Config - Helicopter style Trim

Moderator: AdminGroup

Alex Oz
Posts: 1163
Joined: Mon May 12, 2008 9:10
Location: Минск
Has thanked: 12 times
Been thanked: 125 times

Re: VKB Device Config - Helicopter style Trim

Postby Alex Oz » Mon Mar 11, 2019 22:52

May be later change poll.

v1_96_A(3)/VKBDevCfg-C_v0.89.93
Tr.Mix.jpg


Linear.jpg

S-Shape.jpg
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de

hon0
Posts: 162
Joined: Mon Jan 25, 2016 20:05
Location: France
Has thanked: 181 times
Been thanked: 51 times

Re: VKB Device Config - Helicopter style Trim

Postby hon0 » Wed Mar 13, 2019 15:51

This is awesome :clap: A bit fast maybe, I'll use 1000*10 setting. I think it would be nice to add interval setting, from 500 to 1000 (For rate setting Tr.Rate x 10). Doing some test I realize that when we release the FA0 trim button, the axis doesn't jump to its actual position as I thought. It is rate "limited". Well done, again :clap:. It is far less important, but if I could choose an option to smooth that the same way as the Trim reset, I would.
Edit : "May be later change poll." Thanks.

Thanks again for your quick and efficient after sale support-work!

I have some other feature idea, but I'll do further posting on the IL2 forum if you prefer.
VKB Devcie Config v0.91.26 - Firmware version: v1.994

Alex Oz
Posts: 1163
Joined: Mon May 12, 2008 9:10
Location: Минск
Has thanked: 12 times
Been thanked: 125 times

Re: VKB Device Config - Helicopter style Trim

Postby Alex Oz » Mon Mar 18, 2019 10:19

hon0 wrote:Side note : Could we have a option in the "Settings" panel to choose the starting value of "poll" in Profile - Buttons. Each time I go there I want to tick it to check my config.


Something changed in VKBDevCfg-C_v0.89.98(2)
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de

petsild
Posts: 13
Joined: Sun Mar 27, 2022 11:12
Has thanked: 1 time

Re: VKB Device Config - Helicopter style Trim

Postby petsild » Sun Mar 27, 2022 11:24

Hi,
there is a way to eliminate the initial overshoot, for example by a time delay to the central position?

Image

User avatar
k1ebe
Posts: 12
Joined: Fri Jun 02, 2017 11:14
Location: Norway
Has thanked: 8 times
Been thanked: 3 times

Re: VKB Device Config - Helicopter style Trim

Postby k1ebe » Sun Mar 27, 2022 14:59

You can just hold in your chosen trimmer button, return to center and then release the trimmer at your own leisure.

petsild
Posts: 13
Joined: Sun Mar 27, 2022 11:12
Has thanked: 1 time

Re: VKB Device Config - Helicopter style Trim

Postby petsild » Sun Mar 27, 2022 15:36

Holding down the button does not solve anything.
The function would have to be redesigned for a time delay or something else.

User avatar
k1ebe
Posts: 12
Joined: Fri Jun 02, 2017 11:14
Location: Norway
Has thanked: 8 times
Been thanked: 3 times

Re: VKB Device Config - Helicopter style Trim

Postby k1ebe » Sun Mar 27, 2022 15:57

This is how I have set it up and holding the trimmer button works for me:
Screenshot 2022-03-27 144959.png

Screenshot 2022-03-27 145608.png

Screenshot 2022-03-27 144928.png

petsild
Posts: 13
Joined: Sun Mar 27, 2022 11:12
Has thanked: 1 time

Re: VKB Device Config - Helicopter style Trim

Postby petsild » Sun Mar 27, 2022 16:32

I mean eliminate the double addition of the trim size before you can center the stick.
So holding down the button will give you 2x as much trim as you need.

User avatar
k1ebe
Posts: 12
Joined: Fri Jun 02, 2017 11:14
Location: Norway
Has thanked: 8 times
Been thanked: 3 times

Re: VKB Device Config - Helicopter style Trim

Postby k1ebe » Sun Mar 27, 2022 16:40

I'm not seeing that behavior, so it could be something in how you have configured it that causes that jump.
Screenshot 2022-03-27 153804.png

petsild
Posts: 13
Joined: Sun Mar 27, 2022 11:12
Has thanked: 1 time

Re: VKB Device Config - Helicopter style Trim

Postby petsild » Sun Mar 27, 2022 17:03

Your picture shows a different course, that's exactly how I would like it.

petsild
Posts: 13
Joined: Sun Mar 27, 2022 11:12
Has thanked: 1 time

Re: VKB Device Config - Helicopter style Trim

Postby petsild » Sun Mar 27, 2022 17:16

Here is my configuration.

Image

Image

Image

User avatar
k1ebe
Posts: 12
Joined: Fri Jun 02, 2017 11:14
Location: Norway
Has thanked: 8 times
Been thanked: 3 times

Re: VKB Device Config - Helicopter style Trim

Postby k1ebe » Sun Mar 27, 2022 18:21

This is strange. When set my stick to default and only add a FA0 button and set "Trimmer +" to axis 1 & 2. I get the expected behavior.
When kind of button is your #35?
If, for example, this is a Tempo-button we would see what you are experiencing.

petsild
Posts: 13
Joined: Sun Mar 27, 2022 11:12
Has thanked: 1 time

Re: VKB Device Config - Helicopter style Trim

Postby petsild » Sun Mar 27, 2022 18:23

I have made progress, it is necessary in the Basic settings to enable FA,
then holding the button works properly.
Thank you K1ebe for your support and patience. Pet

Image

User avatar
k1ebe
Posts: 12
Joined: Fri Jun 02, 2017 11:14
Location: Norway
Has thanked: 8 times
Been thanked: 3 times

Re: VKB Device Config - Helicopter style Trim

Postby k1ebe » Sun Mar 27, 2022 18:29

No worries! Happy flying! :D

Bastlwastl
Posts: 11
Joined: Mon May 24, 2021 23:11

Re: VKB Device Config - Helicopter style Trim

Postby Bastlwastl » Tue Dec 20, 2022 4:31

Hey there,

i tried the "fix axis" style trim for helicopters and it works great, besides the return-rate. No matter what i set up in the rate oder time settings, the axis return directly to center. Am i doing something wrong?

3.JPG

1.JPG

2.JPG


Another question: Is it possible, when i release the "trim"-button (that fixes the axis), that my stick position gets accepted as the new center, so that there is no jump at all?



Thank you very much!


Return to “Technical Support”

Who is online

Users browsing this forum: Bing [Bot] and 29 guests