May be later change poll.
v1_96_A(3)/VKBDevCfg-C_v0.89.93
VKB Device Config - Helicopter style Trim
Moderator: AdminGroup
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: VKB Device Config - Helicopter style Trim
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
-
- Posts: 162
- Joined: Mon Jan 25, 2016 20:05
- Location: France
- Has thanked: 181 times
- Been thanked: 51 times
Re: VKB Device Config - Helicopter style Trim
This is awesome :clap: A bit fast maybe, I'll use 1000*10 setting. I think it would be nice to add interval setting, from 500 to 1000 (For rate setting Tr.Rate x 10). Doing some test I realize that when we release the FA0 trim button, the axis doesn't jump to its actual position as I thought. It is rate "limited". Well done, again :clap:. It is far less important, but if I could choose an option to smooth that the same way as the Trim reset, I would.
Edit : "May be later change poll." Thanks.
Thanks again for your quick and efficient after sale support-work!
I have some other feature idea, but I'll do further posting on the IL2 forum if you prefer.
Edit : "May be later change poll." Thanks.
Thanks again for your quick and efficient after sale support-work!
I have some other feature idea, but I'll do further posting on the IL2 forum if you prefer.
VKB Devcie Config v0.91.26 - Firmware version: v1.994
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: VKB Device Config - Helicopter style Trim
hon0 wrote:Side note : Could we have a option in the "Settings" panel to choose the starting value of "poll" in Profile - Buttons. Each time I go there I want to tick it to check my config.
Something changed in VKBDevCfg-C_v0.89.98(2)
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
Re: VKB Device Config - Helicopter style Trim
Hi,
there is a way to eliminate the initial overshoot, for example by a time delay to the central position?
there is a way to eliminate the initial overshoot, for example by a time delay to the central position?
Re: VKB Device Config - Helicopter style Trim
Holding down the button does not solve anything.
The function would have to be redesigned for a time delay or something else.
The function would have to be redesigned for a time delay or something else.
Re: VKB Device Config - Helicopter style Trim
I mean eliminate the double addition of the trim size before you can center the stick.
So holding down the button will give you 2x as much trim as you need.
So holding down the button will give you 2x as much trim as you need.
Re: VKB Device Config - Helicopter style Trim
Your picture shows a different course, that's exactly how I would like it.
- k1ebe
- Posts: 12
- Joined: Fri Jun 02, 2017 11:14
- Location: Norway
- Has thanked: 8 times
- Been thanked: 3 times
Re: VKB Device Config - Helicopter style Trim
This is strange. When set my stick to default and only add a FA0 button and set "Trimmer +" to axis 1 & 2. I get the expected behavior.
When kind of button is your #35?
If, for example, this is a Tempo-button we would see what you are experiencing.
When kind of button is your #35?
If, for example, this is a Tempo-button we would see what you are experiencing.
Re: VKB Device Config - Helicopter style Trim
I have made progress, it is necessary in the Basic settings to enable FA,
then holding the button works properly.
Thank you K1ebe for your support and patience. Pet
then holding the button works properly.
Thank you K1ebe for your support and patience. Pet
-
- Posts: 11
- Joined: Mon May 24, 2021 23:11
Re: VKB Device Config - Helicopter style Trim
Hey there,
i tried the "fix axis" style trim for helicopters and it works great, besides the return-rate. No matter what i set up in the rate oder time settings, the axis return directly to center. Am i doing something wrong?
Another question: Is it possible, when i release the "trim"-button (that fixes the axis), that my stick position gets accepted as the new center, so that there is no jump at all?
Thank you very much!
i tried the "fix axis" style trim for helicopters and it works great, besides the return-rate. No matter what i set up in the rate oder time settings, the axis return directly to center. Am i doing something wrong?
Another question: Is it possible, when i release the "trim"-button (that fixes the axis), that my stick position gets accepted as the new center, so that there is no jump at all?
Thank you very much!
Who is online
Users browsing this forum: No registered users and 39 guests