Hello
I love the Trimmer Time feature allowing us to reset trim smoothly. However I would love it even more if I could specify a rate, instead of a time. Because with a time, the rate will change depending on how much trim we had before we reset. With a predefined rate, muscle memory could build and so in the end it would feel even better in my opinion.
Thanks in advance!
VKB Device Config - Trimmer Time
Moderator: AdminGroup
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: VKB Device Config - Trimmer Time
Hi, hon0,
I already think about it.
I already think about it.
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: VKB Device Config - Trimmer Time
Let's try.
fw 1.96.5 / VKBDevCfg-C_v0.89.33
What's new:
May be it's need to change values of rate ( now the same as for time)
Rate 1000 ms mean that full range of trimmer (100%) for bipolar axes will be will be worked out during 1000 ms.
Also
now Selector Trimmer type ( Standard/Modified) applied for each physical axis:
Not tested - so there may be some inaccuracies.
PS
Unfortunately, I won't be there until Monday (4/02), so I can answer questions later.
fw 1.96.5 / VKBDevCfg-C_v0.89.33
What's new:
May be it's need to change values of rate ( now the same as for time)
Rate 1000 ms mean that full range of trimmer (100%) for bipolar axes will be will be worked out during 1000 ms.
Also
now Selector Trimmer type ( Standard/Modified) applied for each physical axis:
Not tested - so there may be some inaccuracies.
PS
Unfortunately, I won't be there until Monday (4/02), so I can answer questions later.
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
-
- Posts: 162
- Joined: Mon Jan 25, 2016 20:05
- Location: France
- Has thanked: 181 times
- Been thanked: 51 times
Re: VKB Device Config - Trimmer Time
Hello, I finally took the time to test and the Trim Reset seems broken. No matter the Trim.Mode setting I choose in the Global parameter (Time or Rate) I can't reset my trim anymore.
I tested with VKBDevCfg v0.89.66 Firmware v1.96.7 on GF MCG PRO.
On a side note, thanks for the awesome 2D deadzone :clap:
I tested with VKBDevCfg v0.89.66 Firmware v1.96.7 on GF MCG PRO.
On a side note, thanks for the awesome 2D deadzone :clap:
VKB Devcie Config v0.91.26 - Firmware version: v1.994
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: VKB Device Config - Trimmer Time
Hi,
I check with GF+SCG - it work.
Need profile.
I check with GF+SCG - it work.
Need profile.
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
-
- Posts: 162
- Joined: Mon Jan 25, 2016 20:05
- Location: France
- Has thanked: 181 times
- Been thanked: 51 times
Re: VKB Device Config - Trimmer Time
https://www.dropbox.com/s/gt4ep62pz11mu ... OS.7z?dl=0
(Not sure which file you need, the .bak or the .cfg so both are included).
Hi Alex, I just did some test (On a new profile, just after using the default button) and it seems that when the Trim.Time value is 0 I can reset. But if it isn't I can't, no matter the value of Trim.Mode.
(Not sure which file you need, the .bak or the .cfg so both are included).
Hi Alex, I just did some test (On a new profile, just after using the default button) and it seems that when the Trim.Time value is 0 I can reset. But if it isn't I can't, no matter the value of Trim.Mode.
VKB Devcie Config v0.91.26 - Firmware version: v1.994
-
- Posts: 162
- Joined: Mon Jan 25, 2016 20:05
- Location: France
- Has thanked: 181 times
- Been thanked: 51 times
Re: VKB Device Config - Trimmer Time
For those interested, problem solved with firmware 1.96A and above. More info in this post/thread.
viewtopic.php?p=34189#p34189
viewtopic.php?p=34189#p34189
VKB Devcie Config v0.91.26 - Firmware version: v1.994
Re: VKB Device Config - Trimmer Time
hon0 wrote:For those interested, problem solved with firmware 1.96A and above. More info in this post/thread.
viewtopic.php?p=34189#p34189
Much appreciate your help Sir!
Best Regards,
AeroGator
AeroGator
Who is online
Users browsing this forum: No registered users and 39 guests